Benjamin My Benjamin Prod by Airgun Revisions

I dont mind the fill location at all, I prefer a foster over probe myself.
@_CTAIRGUNNER_ Makes sense seeing that the barrel on your Prod appears to be longer than what comes with the stock gun.either that or there’s some sort of add-on piece between the barrel and the moderator. Therefore the affixed moderator does not interfere with the foster quick connect on a fill whip. Not a bad idea.
 
@_CTAIRGUNNER_ Makes sense seeing that the barrel on your Prod appears to be longer than what comes with the stock gun. Therefore the affixed moderator does interfere with the foster quick connect on a fill whip. Not a bad idea.
Yeah, I have never really looked at a stock Prod too in depth, I just called Rich and asked for something haha, I am glad it is pointed out to me that he added this because now I know, I definitely think its a good idea myself.
 
  • Like
Reactions: MysticalDragon
Yeah, I have never really looked at a stock Prod too in depth, I just called Rich and asked for something haha, I am glad it is pointed out to me that he added this because now I know, I definitely think its a good idea myself.
Yeah….if u look at hill’s moderator for the prod he extends it to make room the a fill fitting.
But I’d rather somebody made up a side filling option like Hume did for the mrod.

For the record…I absolutely didn’t bash. Simply observing and commenting.

 
Nice!
Is this the Rapid-70 kit? Can you list all the mods? I think this would be great next to my wood stock to highlight the range of possibilities. Any links to the mods would be appreciated. TIA
So I’m not sure the rapid frame is still available. But yes….this is one of them :)

Mine has a Huma reg with a custom 16cc plenum. .18” transfer port.
Hill light weight hammer with peek striker and hills .047x2” hammer spring.
(Hard to believe how much that hammer settled down the shot cycle)
Got is doing 3 mags (24 shots) of 18 gr jsb at 655 fps
It’s impressively accurate out the 50y

For some reason my barrel doesn’t like the 16gr jsb and hades.

Sorry to hijack the post….
 
  • Like
Reactions: _CTAIRGUNNER_
So I’m not sure the rapid frame is still available. But yes….this is one of them :)

Mine has a Huma reg with a custom 16cc plenum. .18” transfer port.
Hill light weight hammer with peek striker and hills .047x2” hammer spring.
(Hard to believe how much that hammer settled down the shot cycle)
Got is doing 3 mags (24 shots) of 18 gr jsb at 655 fps
It’s impressively accurate out the 50y

For some reason my barrel doesn’t like the 16gr jsb and hades.

Sorry to hijack the post….
Dang- I would like that frame, to go with the P-Rod CT has in the thread- perfect ying yang imo
 
  • Like
Reactions: _CTAIRGUNNER_
@_CTAIRGUNNER_ Makes sense seeing that the barrel on your Prod appears to be longer than what comes with the stock gun.either that or there’s some sort of add-on piece between the barrel and the moderator. Therefore the affixed moderator does not interfere with the foster quick connect on a fill whip. Not a bad idea.
It’s a DonnyFL extended adapter

I had one along with a full fitting with gauge from MAP on my Rapid 70 Prod bullpup. I don’t have the Rapid 70 kit anymore. It was interesting at first but I couldn’t get comfortable with it and didn’t like the ergonomics of it. The Prod is a much better carbine than a bullpup IMHO.

IMG_9093.jpeg
 
It’s a DonnyFL extended adapter

I had one along with a full fitting with gauge from MAP on my Rapid 70 Prod bullpup. I don’t have the Rapid 70 kit anymore. It was interesting at first but I couldn’t get comfortable with it and didn’t like the ergonomics of it. The Prod is a much better carbine than a bullpup IMHO.

View attachment 399380
I love this place- You ask and someone giveth- So cool the contrast
 
So I’m not sure the rapid frame is still available. But yes….this is one of them :)

Mine has a Huma reg with a custom 16cc plenum. .18” transfer port.
Hill light weight hammer with peek striker and hills .047x2” hammer spring.
(Hard to believe how much that hammer settled down the shot cycle)
Got is doing 3 mags (24 shots) of 18 gr jsb at 655 fps
It’s impressively accurate out the 50y

For some reason my barrel doesn’t like the 16gr jsb and hades.

Sorry to hijack the post….
I have the same config with light hammer, large TP, other porting and reg at 120. Shooting Hades at 700. Action is much quieter than stock and very crisp. I could not get rid of hammer bounce (farting) with orings or tuning. However, it sounds like CT’s tune is very good in that regard. My next step is to get this stock so thanks for highlighting it, CT! I’m tempted also to get a slightly longer LW barrel (rabbit hole syndrome again 🤓). FWIW, I use an Impulse 1200 mod and its tapering allows me to attach the foster fill without removal or extension. Two sections quietens it down as well as anything else.
 
  • Love
Reactions: _CTAIRGUNNER_
I have the same config with light hammer, large TP, other porting and reg at 120. Shooting Hades at 700. Action is much quieter than stock and very crisp. I could not get rid of hammer bounce (farting) with orings or tuning. However, it sounds like CT’s tune is very good in that regard. My next step is to get this stock so thanks for highlighting it, CT! I’m tempted also to get a slightly longer LW barrel (rabbit hole syndrome again 🤓). FWIW, I use an Impulse 1200 mod and its tapering allows me to attach the foster fill without removal or extension. Two sections quietens it down as well as anything else.
Rich has a new stock coming for these rifles that is the same as mine but extends/flows all the way down toward the end of the tube. May be something worth waiting for :D
 
  • Like
Reactions: MysticalDragon
Looks like this one? Picked up from Rich a few weeks ago. Also added a 20” LW barrel from Hill. I even ordered a Vector Veyron that’s not on it yet.

Custom Profile

Shot count: 18

Low: 670 FPS
Hi: 698 FPS
Avg: 689 FPS
Spread: 28 FPS
STD Dev: 8.4 FPS

14-Oct-2023 13:19:18,687,FPS,19.0,FT Lbs,
14-Oct-2023 13:19:30,691,FPS,19.2,FT Lbs,
14-Oct-2023 13:19:41,696,FPS,19.5,FT Lbs,
14-Oct-2023 13:19:50,694,FPS,19.4,FT Lbs,
14-Oct-2023 13:19:59,696,FPS,19.5,FT Lbs,
14-Oct-2023 13:20:08,698,FPS,19.6,FT Lbs,
14-Oct-2023 13:20:18,694,FPS,19.4,FT Lbs,
14-Oct-2023 13:20:28,694,FPS,19.4,FT Lbs,
14-Oct-2023 13:21:00,696,FPS,19.5,FT Lbs,
14-Oct-2023 13:21:11,694,FPS,19.4,FT Lbs,
14-Oct-2023 13:21:20,691,FPS,19.2,FT Lbs,
14-Oct-2023 13:21:30,694,FPS,19.4,FT Lbs,
14-Oct-2023 13:21:40,689,FPS,19.1,FT Lbs,
14-Oct-2023 13:21:55,684,FPS,18.9,FT Lbs,
14-Oct-2023 13:22:08,680,FPS,18.6,FT Lbs,
14-Oct-2023 13:22:19,675,FPS,18.3,FT Lbs,
14-Oct-2023 13:22:50,673,FPS,18.2,FT Lbs,
14-Oct-2023 13:22:59,670,FPS,18.1,FT Lbs,

View attachment 400305

View attachment 400306
Yep! That's the one!

You'll love the veyron atop it, light, compact and clear!

Gorgeous rifle!
 
@Elis5173 came over today to my home range and unfortunately got a little tied up in traffic so we didn't have much day light. He was really wanting to check out the valdada g2 on my Paradigm but equally intrigued by the Prod, by the time we got to the Prod it was dark, I had to hold a flashlight on the targets and with no IR on the vector optics veyron he still walked the KNOW YOUR LIMITS target at 25 yards all the way down to the last 3/8 of inch spinner.

Needless to say, the prod is really impressive and looks 🔥 🥵 too 👌

20231026_171654.jpg
20231026_171714.jpg
 
I had to hold a flashlight on the targets

We've started shooting at night at a friend's house, and he bought two solar rechargeable landscape lights for about $20.00 that he puts in the ground just below our targets, and they work great...very bright! They run all night and charge during the day. Super easy solution for shooting at night (y)
 
Last edited: