aI am very happy, my crown came to my side, now I am waiting for my spring to come, so that I can restore the power of the US version. 
My crown is finally here.
- Thread starter 928487381
- Start date
Nice! You went all in. You'll have a blast! . Be sure to make note of the current settings before you make adjustments so you have a reference. BAR, hammer spring tension, power adjustments, fps, accuracy, etc... Have fun!
Stoti
Stoti
Upvote 0
Was it a mis-type or did you really mean 150ft/sec? I've heard of power restrictions but that would be a lot. Is adding a high power spring legal or just one of them don't know, don't tell things. Great looking gun, I have the black pepper in 25cal and love it.
JK
JK
Upvote 0
He's in China. I'm sure he meant meters per second since he has the reduced power models from Taiwan.
Upvote 0
Even if he meant meters per second that would be kinda slow. People often forget how lucky we are here in the USA. I just backed off my Crown's reg pressure to about 130BAR, it is slinging the 25.4 JSB's at 925fps. So accurate!!!
Upvote 0
It's about right for 50 bar. You do understand he has the limited power versions and he's ordered parts to make them same as ours. He's just testing as is until his parts arrive.
Upvote 0
Grandpa, hello, I want to send you a speedometer like this, it works very well.
The suspense is killing me, who is Grandpa?
Also, congrats that's a beautiful gun! And really cool gun vise too!
Upvote 0
The Crown is a pretty quiet gun without the DonnyFL add ons. May try it as is and see if it's needed first IMO.
Upvote 0
Yeah Heavy Impact, I get it that it's a limited power version. It shows right on the rifle it's a 20 Joule rifle for Taiwan. In .25 cal, 20 Joules equates to something like 515-520fps (I think). So as I said, it's a little slow. Not knocking the rifle, just stating it's a little slow.
Upvote 0
For now while waiting for your needed upgrade FAC parts, possibly use some washers from hardware store or coins that fit inside to take up some of the empty space to get it to shoot at a higher power. Or go to your local hardware store bring your FX short spring and get another that is longer but same diameter. You may choose to buy several with slightly heavier tension but not too heavy but most importantly longer because you can always cut them shorter to fit better.
CA
CA
Upvote 0
The washers from the hardware store mentioned previously to fill the gap would be placed between the hammer spring and the hammer spring guide?
MS
MS
Upvote 0