N/A My CZ634 is accurate,but the

yes, the trigger sticks they all seem to
oh we posted back in the day when these were still for sale and this was polish this and that
but the trigger is so simply it is hard to make sense, that polishing would be the answer
they are easy to take apart, the spring has little to no preload and the rear just unscrews
i always found that pulling the trigger with the safety on made for a better final trigger pull
back a long time ago i was looking for triggers so i could experiment but as the rifles disappeared and they were renamed Prerun 734 i moved on
so, after working on triggers of all kind since that time i would think-guess that is a side binding thing but how
the trigger assembly is a Trigger, sear 1 spring and 2 pins
it is a disengagement stall system, so the spring can't be change because it's job is the push the sear down as the trigger unhooks
i wanted the extra triggers to see if the contact area between the sear and trigger could be reduced making for a quicker disengagement
i guess i will have to put my blue 634 back in the project stack
http://www.vzduchovka.cz/dokumentace/Slavia634_rozkres.gif
 
  • Like
Reactions: MDriskill
Thanks, Marflow 777(y). The diagram helps. It is part 33 that I think is the problem. It is crazy, the adjuster thing a mo jig. That is the trigger adjustment, the craziest one I have ever seen. You would think a gun that shoots so well would have a better trigger, but I reckon it is the most accurate air rifle anywhere near its price range.Part 41 is different; mine uses a spring and round stud.
 
Last edited:
there was a good write up on GTA years ago and they made a spring with Piano wire and seeing that Piano wire and i do not get alone i passed but the post is their but the pictures are gone
i think you can just remove part 33 and nothing will change
you would think that the long trigger on the Slavia's would have the leverage to slide out of the way of the sear but that get connected and will not reset the trigger and it is caught
i looked for triggers last night again and found none
the 630-631 triggers look the same but are not
i some things to finish up and i will be looking at the 634