My hummingbird died 😔

[Michael]

Can anyone confirm the o-ring size for the 2 large o-rings inside the air cylinder of a Kalibrgun Colibri?

I measured the original deformed ones at 1.215 ID and 0.12 thickness.

Thanks in advance

-Michael

 

[addison]

There's a guy on Facebook kailbergun owners page that shoots this gun primarily and he might could help.

 

[addison]

 

[Jack.K]

Michael, here you go! 

Edit

Air tube o-ring is 30x3 NBR 80. 

PM me if you need a clearer picture. I don’t know why when I upload it is not as clear here. The JPG file is 8.6MB

 

[GotMilk2]

This site is so informative!

 

[Michael]

Michael, here you go! 

Edit

Air tube o-ring is 30x3 NBR 80. 

PM me if you need a clearer picture. I don’t know why when I upload it is not as clear here. The JPG file is 8.6MB

Thank you Jack!

 

[Peskådot671]

Michael, here you go! 

Edit

Air tube o-ring is 30x3 NBR 80. 

PM me if you need a clearer picture. I don’t know why when I upload it is not as clear here. The JPG file is 8.6MB

Try using Imgur picture hosting site. Pics come out a lot clearer.