My new favorite scope rings, UTG Pro and Accu-Sync

[Centercut]

I have to admit, I tried these because I liked the looks first, and that they were made in the USA second. Turns out, they are really good rings, both the two piece and one piece. about $50 on Amazon.com. The two piece are just in black (as far as I know). The one piece come in black, gun metal, olive green, FDE, red, and blue. I've tried both the two piece and one piece, and have them installed on all my "keeper" guns. 

 

[crittahitta]

I use the utg mounts a lot but i never saw that one piece before. That is really nice. Thanks.

 

[DeutschKSK]

Do they center well, and do they need any lapping? 

 

[Centercut]

@deutschksk, I have used one set of the two piece (medium height, dovetail mount), and two of the one piece (medium height, both pic rail, one 34mm offset, the other 50mm offset). All three sets of rings centered perfectly, and required no lapping,

 

[Buckeye]

Centercut 

Do you know if they have those in 34mm?

I have the Discovery in 34mm and don't want to pay 200 for a one piece.

Thanks

Buckeye

 

[MBG]

https://www.amazon.com/UTG-ACCU-SYNC-34mm-Offset-Rings/dp/B07BK8QB53/ref=sr_1_5?ie=UTF8&qid=1541096288&sr=8-5&keywords=utg+pro+34mm

 

[jking]

Mike, by chance do you have a set of the two piece medium that's not mounted on a gun? I'm curious what the saddle height is.

I did some scope swapping and now I need a good ring that's maybe 3/8" shorter than a set a No-Limits. 

Jimmy

 

[Centercut]

I just installed a set on a .22 Renegade that one of the Ranchers wanted for his son for Christmas. I can measure it for you, but "top of the V groove? The Medium is definitely less than my No Limits rings I have on my .177 RAW and .30 Bobcat. If I measured from the bottom of the scope to the top of the dovetail rail would that work? FYI, IMHO, the No Limits rings are overrated. Nice rings, but these are better, unless you need adjustable... Dovetail or Pic rail? 

 

[jking]

Yes, from the bottom of the scope to the top of the rail..

jk

 

[jking]

Mike, I found the information on Hardair Magazine's review of them.

 

[Centercut]

Jimmy,

If you go to http://leapers.com/index.php, find the exact rings you want, 1" or 30mm, Dovetail or Pic rail, High, Medium or Low, then look near the bottom, and highlight and click on "SPECIFICATION", it gives you the exact dimensions of the ring.

Hope that helps, easier and more exact than my measurement...

Mike

 

[Centercut]

Oh yeah, that's even easier... Nice table showing all options. Thanks!

Mike

 

[nomojo65]

These are very good rings! For the $$$, Have two sets,And I lap most rings in only to ensure no stress on scope tube, and you can tell extremely quickly if they are out!,most are not, but if you are attaching these or any two pc. Ring set to a dovetail or picatiny rail this assures no stress to scope tube, and means I have total confidence in the amount of minimal inlbs applied to ringset and alignment, I’ve done this for yrs on center fire rifles with a professional lapping bar. Side note: KELBLY’s and Randolph rings I’ve also used for yrs.( dovetail rings ) these rings are the only rings I don’t even worry about!, and if you know anything about these Manufacturers you’ll understand...

 

[zx10wall]

I concur, great rings. Have bought four sets. 

 

[Buckeye]

https://www.amazon.com/UTG-ACCU-SYNC-34mm-Offset-Rings/dp/B07BK8QB53/ref=sr_1_5?ie=UTF8&qid=1541096288&sr=8-5&keywords=utg+pro+34mm

Thanks Mike!!!

 

[ChuckHunter]

Pretty interesting!

I ordered a set for my Cricket carbine to go with my new Athlon midas I just bought. 

James from Michigan, 

 

[Buckeye]

I ordered a one piece on Fri and had it sunday before noon. The cost on amazon was $22!!

Nicely made, and for the price couldn't pass it up. Needed 34mm rings for my Discovery and the rings it came with were pretty questionable.

Thanks Centercut.

 

[jking]

I ordered a set of lows, haven't mounted them yet but hopefully I'll have about 5mm of gap. I ordered mine from combathunting.com on the 2nd and got them today. Really great service I thought. I had also ordered a set on Ebay but after I had already hit the pay now I realized it wasn't going to be shipped till December so I attempted to cancel that order through Paypal and the dealer and I just got word from the dealer this morning that it was too late , imagine that after three days. Fortunately they have free returns.

One thing I really like about the rings is the single screw hold down and the really precision ground groove clamps.

Jimmy

 

[Imold]

90% of the rings I buy are the UTG rings except for the 2 pair I put on the two scopes I’m going to try on the Mega they are BKL rings( the only silver rings I’ve found) one in silver 25.4 mm and one in black 30mm but I have another set in silver 30mm on order, I also have a pair of black BKL risers on my Texan, when I’ve taken and mounted the UTG rings on a rail next to each other they match perfectly and when separated on the rail my scopes sit flush into the rings saddle. I’ve bought other brands of rings and when place next to each other on the rail and tightened down you can see the difference in the saddles no matter how ive switch them around, I normally just send them back but some I have paid so little for it isn’t worth it.

 

[Scotaty]

I like those rings but I'm not sure should I get low or medium for my impact with aztec scope. What do you think guys?