My perspective on 3 Semi-Auto Airguns - Huben K1, Leshiy 2 and Steyr Pro X

Jump to latest Follow Reply
Guill said:
Bonjour Kris,

« Maintenant, c’est un 600mm FX Barreled .30 cal avec une bouteille FX 480cc, mettant 90+ FPE. Et je l’aime toujours.

Chris »

Je suis très discret, je suis avec grand intérêt le fil, ainsi que ceux sur la Vixen et Kral NP-03.
J’ai une L2 22 450mm, je serais intéressé pour la passage en 22 600mm, avec un canon FX pour slug,
Y a t’il des modifications à effectuer pour le montage ou cela est il direct?
Si oui,
Quel article fx 22 600mm serait’il à commandé, étant donné le multiple choix Fx pour éviter toute adaptation ou modification sur le canon.

www.mundilar.net

Achetez en ligne FX Airguns Carbon Fiber Barrel Liner Sleeve de la FX AIRGUNS • Boutique de Carabines PCP FX AIRGUNS • Mundilar Airguns

Achetez FX Airguns Carbon Fiber Barrel Liner Sleeve dans Carabines PCP FX AIRGUNS et Carabines PCP. FX Airguns Carbon Fiber Barrel Liner Sleeve de la marque FX AIRGUNS est disponible à la vente en ligne dans notre boutique spécialisée Mundilar Airguns.
www.mundilar.net www.mundilar.net
www.mundilar.net

Achetez en ligne FX Airguns Carbon Fiber Barrel Liner Sleeve de la FX AIRGUNS • Boutique de Carabines PCP FX AIRGUNS • Mundilar Airguns

Achetez FX Airguns Carbon Fiber Barrel Liner Sleeve dans Carabines PCP FX AIRGUNS et Carabines PCP. FX Airguns Carbon Fiber Barrel Liner Sleeve de la marque FX AIRGUNS est disponible à la vente en ligne dans notre boutique spécialisée Mundilar Airguns.
www.mundilar.net www.mundilar.net

En vous remerciant, Cordialement Guill.
Click to expand...
Bonjour Guill,

Malheureusement, mon français est assez bon pour comprendre ce que vous avez écrit, mais pas assez pour vous répondre en français.

Je vais cependant essayer.

L'utilisation du canon FX nécessite une modification de la section du port de transfert. Vous devrez acheter quelque chose comme ceci : https://www.huma-air.com/FX-Barrel-Adaptor-For-Edgun-Leshiy-2

Vous devez retirer la section de l'orifice de transfert en laiton du canon FX. Il peut être nécessaire de la chauffer. Sinon, c'est assez simple.

Vous devrez acheter le canon FX complet, et pas seulement la doublure.

Si vous voulez tirer des balles lourdes, vous devrez acheter une doublure pour balles.

Many YouTube videos exist on how to do it.

Hope this helps.

Chris
 
  • Like
Reactions: Guill
Upvote 0
Good afternoon Jesse, sorry no photos. I'm a Ludite when it comes to technology. if I don't need it I don't learn it. The gun looks stock. The barrel is a TJ 1;17 twist. The magazine looks stock, just drilled to .177. Kelly had it made. The internals are stock. I run a Quite Shot moderator on it, way over priced for the performance it provides. I can damn near buy two STO Falixs for the same price and have the same performance level. For a scope I use an Athlon Aros gen 2 FFP MIL 8-32 x 56 ill christmass tree reticle, UTG Pro medium rings, great for my old eyes. It has an aftermarket loading gate. There is an adjustable butt stock. I also added a small piece of selfadhesive foam to the stock for comfort and quick acquisition of check weld. wevil I normally out to 50yds with ocassionally out to 75yds, plinking and ocassionally a pest or two, nothing taxing. Nither of my K1s are pellet picky, .177, .22 or .25. I just have to find the right speed they like. I mainly use 16.2 gr. JBS MRD .177 running around 900fps. I haven't explored slugs yet, with a 1:17 twist I should be able to find a good slug it likes.
 
Upvote 0
jps2486 said:
Where are Hubens made? Not for any criticism, but I just want to know.
Click to expand...

Huben K1.25 2020 questions.

Wait Huben barrel is made in China? If the barrel is made in China I’ll be shocked the rest of the gun isn’t made in China. Sorry to disappoint you but Huben is 100% made in china. Jacky the owner of Huben is from Hong Kong and a member of this forum.
www.airgunnation.com www.airgunnation.com
 
  • Like
Reactions: jps2486
Upvote 0
Stackofhay said:
I just tried it. Works fine. I am right handed, FYI, and just shouldered and shot left handed - no blasts of air or moving parts grabbing at my cheek etc... The Huben is semi-auto so no charging handle to get in the way either!
Click to expand...
Appreciate that. Figured on the lack of charging handle being a huge positive but wasn’t sure about the cheek weld!
 
  • Like
Reactions: Stackofhay
Upvote 0
Jimrogers said:
Love your review if you ever want to sell the Steyr let me know. I have the HuBen in 25 it’s a beast love the gun, I also bought it at New England Airguns. You said the Steyr is not a hunter how about for chipmunks and squirrels? How do you like the stock? Who did you buy it through?
thanks Jim
Click to expand...
Good clear and nicely written comments on semi automatic rifle, Jim.
Helpful to read a customer's experience...Thanks

Couple of comments & questions;

#1) I shoot off-hand 90% and feel lighter is better.... which model did you like best for the overall "feel"?

#2) I am on the FX platform with the Wildcat Mk 2 Compact .25cal (500 mm) and the Crown MKII continuum .22cal.... but only use the 380mm short barrel. Also have the Impact M3 .25cal 600mm, but feel its a little too heavy for off-hand shooting

#3) Do you feel you can actually get a second shot off quickly enough with the semi automatic PCP to actually nail a squirrel if you missed on the First shot? They seem to move very quickly here in Texas.

#4) After using semi automatic air rifle, could you go back to single shot? Or is that pretty much a spoiler experience.... Kinda like a single shot .22 vs a semi automatic power burner rifle?
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu