need a gauge 4500PSI +

[terrykuz]

So my gauge on my Bauer Oceanus does not read. Naturally I can still see the pressure on the SCBA tank, but I want a second gauge for safety.

Fastenal had one listed, but not available. So is there a good vendor for this item? Original is 0-5000, fastenall had 0-6000. I am also not sure on the threads, I guess they are standard? 

 

[mitch]

Try air tanks for sale.com

He has good stuff

Mitch

 

[Saltlake58]

Amazon and Fleabay have lots.

https://smile.amazon.com/LIQUID-FILLED-GAUGE-STAINLESS-CONNECTION/dp/B01NCOX9M7/ref=sr_1_13?dchild=1&keywords=4500+psi+gauge&qid=1592412948&sr=8-13

do beware of fleabay, not always what you want, but the gauges on Amazon should be pretty consistent

 

[Chickenthief]

Your's look like it's 1/4" NPT.





https://www.bestfittings.co.uk/shop/pressure-gauges/charging-kit-gauges/50mm-14-npt-base-entry-precision-gauge/

 

[Raden1942]

Look in your town and see if you have a ditco hydraulics or moss rubber or many other names for hydraulic stores. I'm lucky and live by a refinery so there are like 5 hydraulic stores near me. Often they are in industrial parks and don't even look like a store until you go inside. Others may just be a desk you ring the bell someone asks you what you need you hand them the part and they match it to proper threads and psi. Best way to deal with hydraulics is to buy at storefront. 

 

[KatoKevin454]

check here...... (pt# 3845K1) $21.31

https://www.mcmaster.com/pressure-gauges/pressure-and-vacuum-gauges/maximum-pressure-psi~6000poundspersquareinch/vibration-resistant-pressure-gauges-8/

 

[terrykuz]

Amazon and Fleabay have lots.

https://smile.amazon.com/LIQUID-FILLED-GAUGE-STAINLESS-CONNECTION/dp/B01NCOX9M7/ref=sr_1_13?dchild=1&keywords=4500+psi+gauge&qid=1592412948&sr=8-13

do beware of fleabay, not always what you want, but the gauges on Amazon should be pretty consistent

Thanks guys. I ordered one from Amazon, plus 2 boxes of strawberry protein bars for 26 bucks. Even better, free shipping, and I used my credit card points so even the snacks were "free". 

Mc Master was actually 60 bucks when you checked option boxes like range. 

 

[Eaglebeak]

You need to be sure about the thread type before ordering anything. I can tell by your photo that it is not NPT (no taper), it's probably 1/4 BSPP but may be metric. Any hydraulic- pneumatic hose and fittings supplier should be able to help you with a quality unit. 

 

[terrykuz]

It was 1/4NPT, and the amazon gauge works great. I feel a lot better having 2 gauges. I do have the relief on the compressor at 4000PSI. No need for 4500, I like to run the gas engine anyway. 

Thanks again.