Where to find tech support for the Avenge x . Diagrams schematics and of course teardown or rebuild video . Even someone with avenge x experience or guidance or a dealer that works on them. Slim pickens [no not the actor]
Air Venturi Need Avenge x info
- Thread starter UDABEGGER
- Start date
Product Schematics for Air Venturi Avenge-X Classic, Synthetic Stock | Pyramyd AIR
Check parts availability and price for Air Venturi Avenge-X Classic, Synthetic Stock
www.pyramydair.com Upvote 0
This attached PDF diagram and parts list offers a bit more information than just using the Pyramyd Air drawings - not a lot more.
I have had my Avenge-X completely apart just using the two drawings - the parts order page at Pyramyd and the attached one.
Nothing was too complicated but I did make a driver blade to exactly fit the recess on two of the parts that required a lot of torque to remove so I wouldn't damage the slots
There are a LOT of o-rings and the attached file also lists those by dimension and each location - I had many dried out or damaged o-rings in various places and replaced as needed - in hind sight, I would replace all of them any time I have the gun apart. Several o-rings were deformed enough that the dimension in the PDF were very helpful in putting back the correct sizes.
I had a safety plug on the gun release at about 3400 PSI while filling - the sudden release seems to have caused several o-rings to blow out in that single event - the gun leaked many places afterwards - prompting the tear down.
Some o-rings are challenging to put on...
View attachment AVXTACT Diagram.pdf
I have had my Avenge-X completely apart just using the two drawings - the parts order page at Pyramyd and the attached one.
Nothing was too complicated but I did make a driver blade to exactly fit the recess on two of the parts that required a lot of torque to remove so I wouldn't damage the slots
There are a LOT of o-rings and the attached file also lists those by dimension and each location - I had many dried out or damaged o-rings in various places and replaced as needed - in hind sight, I would replace all of them any time I have the gun apart. Several o-rings were deformed enough that the dimension in the PDF were very helpful in putting back the correct sizes.
I had a safety plug on the gun release at about 3400 PSI while filling - the sudden release seems to have caused several o-rings to blow out in that single event - the gun leaked many places afterwards - prompting the tear down.
Some o-rings are challenging to put on...
View attachment AVXTACT Diagram.pdf
Upvote 0