Need Help with Air Ventura compressor

[Bowhunter73]

Hello everyone I have a air ventura compressor 4500psi 110v that I need to rebuild after my water pump went out and it over heated, I tried searching on here with no luck appreciate any help in find the parts I need to fix my problem.
Thanks in Advance
Terry

 

[jking]

Pyramid Air has some of the parts. You probably need to determine how much damage was done and what parts might need to be replaced.

 

[Bowhunter73]

Pyramid Air has some of the parts. You probably need to determine how much damage was done and what parts might need to be replaced.

Yes sir now that hunting season is over I'll get it setup were I can take it apart and find out what I need, just thought I'd ask about where to buy parts beside Pyramid as they don't carry a lot of parts for it. Thanks

 

[jking]

Some of the Tuxing parts are interchangeable. Just need to look them over closely and see if they are a correct match. AliExpress also has some parts. Here's a thread from a while back that may be of interest to you.

Air Venturi 4500 psi compressor won't pressurize

Mine made that same noise. I assumed it was normal. Hopefully someone will post a better answer for you. I ordered a Tuxing from Veradian Air to use as a back up. Hard to say how long the repair of the AV4500 will take. Well today the black sludge is coming out of my second...

www.airgunnation.com

These seals will work on the high-pressure side at a fraction the cost of PA's also.

https://www.aliexpress.us/item/3256805034293057.html?spm=a2g0o.order_list.order_list_main.5.66281802NoG523&gatewayAdapt=glo2usa

 

[Bowhunter73]

Some of the Tuxing parts are interchangeable. Just need to look them over closely and see if they are a correct match. AliExpress also has some parts. Here's a thread from a while back that may be of interest to you.

Air Venturi 4500 psi compressor won't pressurize

Mine made that same noise. I assumed it was normal. Hopefully someone will post a better answer for you. I ordered a Tuxing from Veradian Air to use as a back up. Hard to say how long the repair of the AV4500 will take. Well today the black sludge is coming out of my second...

www.airgunnation.com

These seals will work on the high-pressure side at a fraction the cost of PA's also.

https://www.aliexpress.us/item/3256805034293057.html?spm=a2g0o.order_list.order_list_main.5.66281802NoG523&gatewayAdapt=glo2usa

jking Thank you that's the answer I was looking for appreciate the Help!

 

[Bowhunter73]

Jking is there any place I can get the piston tool besides Prymid air their out and so is air ventura