Anyone know of a source such as an Ace Hardware, or Menards, or Home Depot where I can find the tiny little half moon shaped "circlip" that attaches on the pin of the cocking lever to the handle of the TX200? Anywhere other than on-line where I would have to order? Anyone know the size of this thing? Thank you!
Air Arms Need the tiny little "circlip" for TX200 cocking lever/handle
- Thread starter thevinoman
- Start date
A good Ace Hardware (is that an oxymoron?) should have drawers of specialty hardware including circlips & e-clips.
My I suggest that you bring the part to be fitted with one along for the ride?
e-clips are astronomical
Edward
My I suggest that you bring the part to be fitted with one along for the ride?
e-clips are astronomical
Edward
Last edited:
Upvote 0
Well folks, tried 3 different auto parts stores and Ace Hardware. No joy. Found something very, very close on McMaster Carr which was stated on another forum that they fit. Placed the order (pack of 100!), for $3.80. and they should be here Tuesday. Will post an update. BTW, Pyramyd Air has them for $4.99 EACH....nope.
Upvote 0
I had the same problem with the cocking arm on my D48. The tiny c-clip would pop off every time I wiped the gun down until I eventually lost it. Ace hardware and Lowes did not have anything close to being that small. I found a tiny oring in my trusty oring kit and tried it temporarily, it works perfect and has been on there for at least a year now, no need for the clip anymore, maybe try that.
Upvote 0
There are two, right?
Take the the club and the rod they go on to Ace Hardware…
Buy several..
Take the the club and the rod they go on to Ace Hardware…
Buy several..
Upvote 0
the clip is an E-clip n1500-0015 that is the size and that is off AA parts
part number is TX305
the clip is worth less than a penny
so find some small copper wire we all have wire scrap that we have saved and wrap it around the pin and then find some clips
https://www.airarmsspares.com/air-arms-spares/
https://www.airgunspares.com/catalog/product/view/id/14269/category/1348/
https://www.amazon.com/Mariyandh-Re...ocphy=9220618&hvtargid=pla-2281435178618&th=1
https://www.springmasters.com/shop/n15000015/
part number is TX305
the clip is worth less than a penny
so find some small copper wire we all have wire scrap that we have saved and wrap it around the pin and then find some clips
https://www.airarmsspares.com/air-arms-spares/
https://www.airgunspares.com/catalog/product/view/id/14269/category/1348/
https://www.amazon.com/Mariyandh-Re...ocphy=9220618&hvtargid=pla-2281435178618&th=1
https://www.springmasters.com/shop/n15000015/
Upvote 0
Upvote 0