Steyr Need Tool Remove Air Cylinder Base- borrow or buy

[chas1969]

Hello AGs

I need to use a Steyr lg110 (most 10m guns) tool to loosen the base cap.
It has 3 holes for a tool with 3 prongs to fit into to unscrew the air cylinder base, the part that screws into the gun.
I will borrow (I will pay shipping of course)or buy.
Thank you Charlie

 

[Emu]

Seems to be an equilateral triangle.

Why don't you try to make three holes on a flat piece of iron and insert three tips of nails previiously rounded?

 

[oledawg]

Here is how someone did it hope this helps

Steyr Air Tube Disassembly instructions | General Airgun Chat

Steyr LG110 Air Reservoir Tube Disassembly I didn t start taking pictures until the end so I don t have more. 1st - make sure you empty all the air, I used the fitting that came with the gun intended for filling and just tightened it up until it opened the valve stem and I let the...

shooting-the-breeze.com

 

[corny]

on stuff like this, I would use three drill bits properly sized. Then use open spanner wrench or anything that will lock onto all three. Like larger sliplock pliers

Piece for nylon strap, twice around the tube. Clamp loose ends in vice to hold tube without marring.

 

[chas1969]

Oledawg and corny, Big thanks

 

[Sqwirl57]

You could just drill three holes into a 2x4 and stick 3 appropriate sized bolts through and lock them in place on the other side with a nut