NEW 750 THREAD...NEW DEVELOPMENTS

Jump to latest Follow Reply
legionair, mine came with that tube I didn't really look at it but I assume it was for removing the air gauge that's what the one with my P15 is for, I'll play with the factory ones a little and then probably buy a couple from Darko in Croatia as I've bought from him before I have 2 for my P15 and when I had a Brocock Bantam he made me one for it great magazines I may have to try one of his SS adapters to.
 
Upvote 0
Hello folks time for an update. Well we made it to Texas. Unfortunantly the hurricane rendered the house and shop we had chosen useless before we arrived. We have found a new home and shop we wre going 300 miles west which places us in a much better no hurricane zone.

Ok now to what you really want to know. Wes shipped 4 boxes of pistols. 2 postal 2 ups. I picked up the 2 UPS boxes tte other day and one postal Wes is tracing the 4th box it has not arrived. The UPS folks were not kind to the boxes. We arrive at our new location Sunday the 6th and I will be back up on wenesday 9th. We will begin shipping 750s on friday after inspection, tuning and testing. Wes has premarked each with your names. You can contact Veradium as of wenesday morning to find out if yours has arrived.

I know you folks have been waiting and we want to thank you for your patience the hurricane thru a loop on things but we have found a new home and will be ramped up quickly this week. Equipmemt has been rerouted and will be onsite Monday Our phone number will remain the same.

For everyone who has a 750 to be tuned we are going to discount the 58.00 bucks to 50.00 we know it is not much but should cover most shipping back to folks. Again I want to thank you for your patience and I look forward to getting all back in full swing in a couple days.

Regards

Brian

Veradium Air

p.s. shameless promoting. Hunters stay tuned we will have a announcment this week for.you. hint 350acres.
 
Upvote 0
Good morning all, time for another update. As we stated the first house we leased was made trash by hurricane, we found another and drove 300 miles to it only to find the owner had not ispected the house after a storm and we found it well to say the least as bad as first!. This whole trip has been a long hard struggle. On a holiday weekend we found a great realestate lady who took her vacation time to find us a home and shop, My hats off to her. We ended up going back 300 miles but it was worth it, she did a great job and we have now been in the home and shop for a few days and are close to gettting fully ramped up. I will be offically opening on Monday 14th I know this is several days back from our schedule, we have been working 20 hr days to get shop setup and it will be finisihed today. Folks this was the best move for Veradium Air, and although not smooth we are in new facilties and excited to getting back to building and servicing air guns for you.
I want to thank everyone for thier patience and I am going thru all emails we received over the last couple weeks as we have not had access to our servers to reply. Please be assured they will all be answered before the end of the day. FOr the PP750s We start on them on Monday and will make sure they are completed and getting to you folks starting this week.
Again thank you for your graciousness and understanding we cant thank you enough for your support.

Respectfully
Brian
Veradium Air
 
Upvote 0
 

carmpp750mags.1600305331.jpg


These came in today. I had read it would take a month, but they came in 2 weeks.

Easier to use for me at least, than the one that came with the gun.

Only downside for me is regular polymags do not fit in either magazine, so I'll have to single load them until the shorts get here.

Much better design, pellets don't rattle in the magazine while loaded.
 
Upvote 0
Good afternoon folks as you have been waiting for your PP750 pistols wanted to let you know a couple items. The final box made it no thanks to postal service but it is here now.
We have been working on them diligently wanted to let you know some of the items we have been documenting for Wes. It has taken a bit longer, we have found issues with some of the pistols and wanted to let you know why it is important for an initial inspection and what we are doing to fix these issues.

Ok first let me tell you the receiver air passage is a respectable .136 opening, unfortunantly the valve-regulator and the barrel passages are .116 go figure. this item is easily solved we are opening all passges to .136 to provide good airflow from tank to barrel and have a good machine match. stuck regulators, belvilles that are not functioning properly due to crap machining, and some debris and cut O-rings very rough cocking due to again poor machining at factory. All these items are being fixed as part of tune we are performing on the PP750s.

Now some other items we are discovering, several pistols are missing cocking lever springs, we have found many that have had there hammer springs cut back, and quite frankly they have missed the mark on several mounting screws as well. In fact they are grinding flats in them to make the allow parts to fit. I have attached a couple images showing these items we have found. NOW that being said Wes has no control over chinese QC. but Ver adium will not ship these pistols as they are not fair to client who has spent there deneros on them.

SO than being said I have decided to fix ALL issues on these pistols it will be done at no charge to the pistol owners, from now on these are no longer chinese pistols they are Veradium Air pistols and all repairs done will be completed by Veradium and will be included in the 58.00 tune setup. I wanted you folks to understand why there has been a longer time than expected to get them out.
Now for the good news! we are very happy with the results after getting all the cruddy factory work fixed, you will be plesently suprised. 👍 So for the big answer we are shipping pistols out now, all will be out of our shop and on there way by the end of next week and in your hands.
We thank you for your patience but sending these out with a lite tune and no work on the other issues just is not in our wheel house and I believe when you receive them you will understand. Thank you and we look forward to continuing to help bring quality work to folks. I thank you for your time and patience.
Regards
Brian
Veradium Air

Here are items found and have corrected.

20200925_165849.1601075216.jpg
20200925_165921.1601075216.jpg
20200925_170152.1601075216.jpg

 
Upvote 0
Brian, thanks for the updates and all my respect for your way of handling the situation with the PP750s from shipping to work quality.
With your eventful move, there is a high chance my previous E-Mail and text message were lost or came at the wrong time.
I hope you don't mind me manifesting myself once again through AGN as it seems things are calming down a bit for you.
My PP750 also comes from Wes but was not part of the 4 shipments sent to you. If you're Ok with it, I'd like to send you mine at a convenient time for you.
Best regards,
Ronan
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu