New Hatsan Springer

[Hateful McNasty]

Just seems that one in my picture if you tried to bend or straighten it it just crack or snap in 2 . Maybe some pot metal looking stuff. I dont know but that's the feeling i get from its material.. now the 25 sc pistol aint bad vs the rifle on feel and pull direction. Its more a stamped steel.

 

[SteveP-52]

Had to seriously dig in the notebooks to find this but the chrony numbers I got when I tested it before tearing it apart to swipe the gas ram:
-Benji Dome 27.8gr: avg 540 fps, 18fpe
-H&N FTT 19.91gr: avg 621 fps, 17 fpe
-JSB 25.39gr: avg 560 fps, 17.68 fpe
-Polymag 26gr: avg 578 fps, 19.3 fpe
-H&N Crow Magnum 26.23gr: 561 fps, 18.3 fpe
-Hatsan Vortex 629 avg, 17.5 fpe
With a spring, the numbers should be within 10-12 of that. Your numbers may well vary a bit but should at least give you an idea.

Just seems that one in my picture if you tried to bend or straighten it it just crack or snap in 2 . Maybe some pot metal looking stuff. I dont know but that's the feeling i get from its material.. now the 25 sc pistol aint bad vs the rifle on feel and pull direction. Its more a stamped steel.

Again, not talking about the Quattro although I've read any number of stories from owners who have had those Quattro triggers snap at the front 2 screws. It's just whatever cheap metal Hatsan made them out of then drilled 2 big holes for the adjustment screws and then plated them.

 

[Privateer]

Always hated the Quattro Trigger. You have to do an upwards pull instead of a back pull.
Now the AT44 Pump has a different trigger blade. Never did get one to see if it would be interchangeable with other Models.

 

[Moog]

Have any of you guys tried fitting a trigger shoe to those trigger blades?

 

[Hateful McNasty]

Giy on you tube does the striker trigger mod and seems at gta a guy had custom hatsan trigger . Where from dont know.

 

[Privateer]

Giy on you tube does the striker trigger mod and seems at gta a guy had custom hatsan trigger . Where from dont know.

Use to be a Quattro Trigger Blade from Poland one could get. Pretty much like the AT44 Pump trigger blade.
IF Hatsan will sell you one? I'd give it a try.
Still have several Quattro Triggers here. Really need to finish dumping that stuff.

 

[SteveP-52]

Giy on you tube does the striker trigger mod and seems at gta a guy had custom hatsan trigger . Where from dont know.

Welsh Willy in the UK, aka Woodfield-GCP, makes one for the Edge/Striker/1000x rifles, but he doesn't advertise them on his website. An email will usually get you an answer on whether he still makes them and how much he's asking for one.
The Charlie da Tuna GRT III also drops right in and works. Sadly, the blade itself is entirely too short to get your finger on:

 

[Mcrafty1]

My Hatsan Striker 1000X in .25 cal. has arrived, is came last night so I didn't get a chance to take it for a test drive until today. It is now gone over and sighted in at 30 yards with the open sights, It really is a decent rifle. It packs a wallop and the fit and finish is to my eyes excellent. It doesn't have the quattro trigger but it has a smoother release than my 95. I honestly don't see how they can sell this gun and ship it half way across America for $124.99 plus tax. I'll know more as I use it but for now, I'm calling it a win.