HW/Weihrauch New HW35E on the way!

Jump to latest Follow Reply
sekiar said:
UPS about two hours ago delivered my HW35E. Unboxed it and sure enough it's really a dark walnut stock, however I was asked if a dark stock would do and I said ok. I'll surely will grow to love it, and I also shot about a dozen pellets just to get a fell of the action. So far so good. Charles
Click to expand...
If too dark for your liking, sand down the stock and hit with lighter stain and use Tru-oil, Tung oil or other finish. Make sure U mask off the checkering.

135E Gun 016_zps6kpzf70g.jpg


New - Dark HW35E.jpg


HW35E - In Progress.jpg
 

Attachments

  • HW35E - Sanding.jpg
    HW35E - Sanding.jpg
    123.4 KB · Views: 23
Last edited:
  • Like
Reactions: Frogy, JDR, Mycapt65 and 1 other person
Upvote 0
sekiar said:
UPS about two hours ago delivered my HW35E. Unboxed it and sure enough it's really a dark walnut stock, however I was asked if a dark stock would do and I said ok. I'll surely will grow to love it, and I also shot about a dozen pellets just to get a fell of the action. So far so good. Charles
Click to expand...
Well did you get a chance to shoot it much. The HW35E is definitely on my bucket list , so when I see post on it I’m like a dog with a bone
 
  • Like
Reactions: sekiar
Upvote 0
sekiar said:
UPS about two hours ago delivered my HW35E. Unboxed it and sure enough it's really a dark walnut stock, however I was asked if a dark stock would do and I said ok. I'll surely will grow to love it, and I also shot about a dozen pellets just to get a fell of the action. So far so good. Charles
Click to expand...
The darker it is the more “Vintage” it looks. Even though you just won’t let us get a peek at it, Congratulations. Lol
 
Upvote 0
@Bear-of-Grayling and @Mycapt65 pic below that I keep forgetting to post. Best guess is it’s red Loctite. Tried to get a small pick in to dig some out but it’s tight and I don’t want to scratch the barrel. Will a heat gun do the trick or better off using a propane torch? The buggered up part of brake is where I tried to tap off with piece of leather between it and large screwdriver. The metal is super soft as you can see. Thanks.

20230716_101144_resized.jpeg
 
Upvote 0
cjtamu said:
@Bear-of-Grayling and @Mycapt65 pic below that I keep forgetting to post. Best guess is it’s red Loctite. Tried to get a small pick in to dig some out but it’s tight and I don’t want to scratch the barrel. Will a heat gun do the trick or better off using a propane torch? The buggered up part of brake is where I tried to tap off with piece of leather between it and large screwdriver. The metal is super soft as you can see. Thanks.

View attachment 373228
Click to expand...
Start with the least aggressive. Heat gun. Torch if necessary.
CB52AA11-89AB-4FB4-B31A-E47416CA0C94.jpeg
 
Upvote 0
MikeAndrews said:
SpiralGroove your end result is beautiful. Did you do anything with the finger groove besides taping it off?
Click to expand...
Nope, just two coats of cheap spray paint and then polished off any overspray outside the groove with mothers mag polish. That way the groove can be filled perfectly.
 
  • Like
Reactions: Hateful McNasty
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu