Check out my new Impact and Crown barrel design, It will use two large o-rings stretched over the top of the Barrel. This one will work with the different extended bipod mounts and the pump actions.
Will this also work with the Maverick?
By any chance are you going to offer the STL file or do you plan on selling them. Just curious.
Mr,
This is a well thought out, simple solution ( read 'Elegant') to a common issue that seems to plague the Impact/Maverick Platforms? However a picture of a 3D CAD Model is relatively easy to do, the hard part is actually making and testing!
With that being said, if you do get to that stage and it proves successful, I would be interested in one ?
Best of Luck
Joe
Will this also work with the Maverick?
I'm not sure if they would work on the Maverick, but all check
By any chance are you going to offer the STL file or do you plan on selling them. Just curious.
I'm working with Utah airguns to add a STL File site to there web page for a small fee or maybe free. I might see Justin tomorrow all ask him if he as given any more thought to adding this to there site. I'm not above giving the STL away, but I rather make it available to the airgun community with help from Utah Airguns.
Mr,
This is a well thought out, simple solution ( read 'Elegant') to a common issue that seems to plague the Impact/Maverick Platforms? However a picture of a 3D CAD Model is relatively easy to do, the hard part is actually making and testing!
With that being said, if you do get to that stage and it proves successful, I would be interested in one ?
Best of Luck
Joe
Your point is understood if your thinking about making it from a aluminum or a molding process, But in the modeling world of 3d printing it easy, I have one already made. It prints in about 6 hours