New to PCP, How often do FX guys tinker vs shoot?

Jump to latest Follow Reply
wyfly said:
I'm new to PCP. I bought a Gauntlet 2 and got hooked. Now I'm looking at other rifles and FX have caught my eye. I like to tinker. And I like the idea of .25 and .35 as I have a farm with pests and game.

What I'm wondering is, how often are FX guys stuck fiddling with their guns instead of shooting them. I mean I get that the whole point is to fiddle with them, but after fiddling and taking good notes, can one return to previous settings or at least close enough?

And what's all this talk of constant POI shift?

I guess what I'm asking is can I grab the gun and shoot, or do I have to tinker first?
Click to expand...
I like the Maverick, you can mess with it to your hearts content and if you know your starting point you can get it back. I've got a .25 VP and a .25 Sniper, I've got the Sniper with JSB 25.39 King Diablos perking along at 1,030 fps, and the King HeavyThe Diablos 33.95's a more sedate 935. Turning down the adjustor brings the 25.39's down to a more reasonable 935. But to your last question, you can grab and go, they absolutely LOVE the JSB Match Diabolo Exact King .25 Cal, 25.39 Grains,, you may have to tinker a touch with the regulator pressures but, with a digital gauge on the back it's easy. The cheap one on Amazon works fine, use a touch of silicon oil on the sealing face. Note I had a bad front reg,. o-ring from the factory. Also the 3mm ball in the adjustor has a horrible habit of running away, work on a towel and nice fluffy towel.
 
  • Like
Reactions: N2 Shooter and Reg Creep
Upvote 0
estarkey7 said:
I have the Maverick VP in .30 cal, and I think it's an excellent mix of smaller size for hunting in the woodlands but still having plenty of power.

I did add a Magpul mount to allow me to have a 2 point sling in the low ready position. I have a DonnyFL Ronin suppressor attached which adds a bit to the length, but I have no issues shouldering it leaning against a tree.

View attachment 291267
View attachment 291268

View attachment 291269View attachment 291270
View attachment 291271


View attachment 291273

View attachment 291272
Click to expand...
How'd you attach that rear sling mount? Sweet.
 
Upvote 0
HogKiller said:
How'd you attach that rear sling mount? Sweet.
Click to expand...
Thanks!

Originally, I had a hook clasp on the front pic rail, and I tried to repurpose the buttstock adjustment screw hole, but I wasn't confident enough in that implementation. So I ended up drilling a hole in the frame, and mounting a MagPul female connection point in place. It was just one screw and and one nut and some locktite red, and I was all set! I also added locktite red to the front MagPul pic rail adapter. I've walked at least 10 miles through woodlands on public lands over several days, and not be tired! It's so nice to have the gun in a position that I can just let hang in the low ready while I glass the trees and surroundings. I'm gonna make a separate post with the parts list so I don't hijack the OP's thread.

20220424_194819.jpg
 
  • Like
Reactions: Reg Creep
Upvote 0
estarkey7 said:
Thanks!

Originally, I had a hook clasp on the front pic rail, and I tried to repurpose the buttstock adjustment screw hole, but I wasn't confident enough in that implementation. So I ended up drilling a hole in the frame, and mounting a MagPul female connection point in place. It was just one screw and and one nut and some locktite red, and I was all set! I also added locktite red to the front MagPul pic rail adapter. I've walked at least 10 miles through woodlands on public lands over several days, and not be tired! It's so nice to have the gun in a position that I can just let hang in the low ready while I glass the trees and surroundings. I'm gonna make a separate post with the parts list so I don't hijack the OP's thread.

View attachment 291305
Click to expand...
Ok, thanks, appreciate it. I don't do any real walking but I have to carry some stuff to were I set up for ground squirrels.
 
  • Like
Reactions: N2 Shooter
Upvote 0
I believe most of the issues with FX occur with the impact and maverick because of the advanced tuning features these rifles have. In the hands of beginners or seasoned, ham fisted tinkerers these tuning features and constant taking the gun apart to tweak things lead to a host of problems. If you’re brand new to airguns and don’t feel confident working on your gun just order it from a dealer who can tune your gun before sending it to you.

As for the POI issues: the impact might not be as tough as an evol or vet but it’s also in a different league. I look at an impact as an exotic sports car. It’s not designed to be banged up and abused, or dragged behind a truck for a mile lol. Treat it accordingly and it will perform as it should.
 
  • Like
Reactions: Glem.Chally, N2 Shooter and Reg Creep
Upvote 0
I have three FX airguns, a Royale 400, a MK1 Wildcat and a Maverick Compact all in .22. The Royale is my favorite and is mostly a set and forget. I just shot it over the chronograph for the first time in about a year and could hardly believe how consistent it shot. Not only were my 40 yd groups excellent but the SD and extreme spread were very small.

I purchased the Royale used and tuned it when I bought it. I had to rebuild the reg once, but mostly never touch it. It’s extremely consistent and while I occasionally adjust my zero slightly I haven’t had issues with POI shifts. The stock fits me like it was custom made.

Hands down my WC is the best to shoot off hand. It has excellent balance. Like the Royale it is mostly a tune and forget. I purchased it used as well. I’ve owned it four years and had a couple minor leaks that were easy to fix. Unlike the Royale I have had POI shifts with the WC. If I notice a POI shift I will clean the barrel, maybe every 2-3 tins of pellets. Cleaning consists of a few patches with a Patchworm. The Royale seems to need less frequent cleaning.

I’ve had the Maverick for about two months and I’m really enjoying it. The external adjustments make tuning it irresistible which is part of the fun. It’s an excellent shooter with a variety of pellets. With a few turns of the power wheel I can go from shooting Hades, to JSB 18.13s, to JSB Monsters and it shoots them all very well.

FX has produced several excellent videos that help make working on their products relatively easy. I use their downloadable parts diagrams to get all of the o’ring sizes I might possibly need. For a few dollars I keep spares of every o’ring on hand but rarely ever need them. There are many excellent manufacturers to choose from and I think FX is one of them. Overall I’m a very satisfied FX customer.
 
  • Like
Reactions: N2 Shooter and Reg Creep
Upvote 0
jps2486 said:
Decide which model gun you want and choose a reliable dealer. Ask him to set the gun up to what projectile you plan to use and what power level you want. Then leave it alone and shoot. Otherwise, your tinkering is at your own risk. Here's an FX tool kit for you.

View attachment 291382View attachment 291383
Click to expand...
That bottom picture looks like a friend of mine with a AR look alike .22LR, only missing a few things.
 
Upvote 0
legionair said:
I believe most of the issues with FX occur with the impact and maverick because of the advanced tuning features these rifles have. In the hands of beginners or seasoned, ham fisted tinkerers these tuning features and constant taking the gun apart to tweak things lead to a host of problems. If you’re brand new to airguns and don’t feel confident working on your gun just order it from a dealer who can tune your gun before sending it to you.

As for the POI issues: the impact might not be as tough as an evol or vet but it’s also in a different league. I look at an impact as an exotic sports car. It’s not designed to be banged up and abused, or dragged behind a truck for a mile lol. Treat it accordingly and it will perform as it should.
Click to expand...
I'm not sure there is really much to take apart (Maverick), yeah a regulator may have o-ring problems..THANKS FX..but beyond that I personally haven't seen the need to spend a ton of money trying to throw 60gr slugs at 2,000 fps. :unsure: But hey, it's a hobby so I'm not judging. Now excuse me I need to reassemble my Sniper. I'm leaving my VP alone it works.
 
Upvote 0
Some of us just crave power and become obsessed with trying new things. It all depends on your personality and what "you" enjoy. It is a hobby for most and a profession for a few.

I personally wish my personal profession was competing, testing, shooting, advertising, and soliciting knew products. It sounds like a literal blast shooting day in day out with like minded folks. Who knows, maybe when I retire some day.

The main point is if you have the means (financially and mechanically) and enjoy air rifles, Y.o.l.o. Life is short.
 
  • Like
Reactions: Reg Creep
Upvote 0
i love to tinker..modifying and machining whatever for my air rifles. but when i spend "X" amount on a given rifle i shouldn't have to touch it other than the external adjustments offered by the factory...I'm definitely a RTI fan as well as FX. i love the barrel swap system they have developed... i have the 177,22 and 25 barrels for both.. the only tinkering is figuring out the settings for each barrel. writing it down so when i swap it only takes minutes to set up and i'm off and shooting.. once that is accomplished i spend more time shooting... i buy the lower end stuff is a tinker's delight...
 
  • Like
Reactions: Reg Creep
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu