Nikko Stirling Platinum 8-32×60 Nighteater – reticle zeroed – question

[bigHUN]

This would be a double post, the first is in Optics section but really not expecting there more then just generic answers. I know the FT shooters are more refined with these things.

https://www.airgunnation.com/topic/nikko-stirling-platinum-8-32x60-nighteater-reticle-zeroed-question/?referrer=1

1.) - Trying to input this MilDot reticle into the Strelok Pro, and asking for the ranging magnification where this reticle was zeroed? Also I would need it to set my own parallax.

Anybody can help me with the scope original doc, in pdf maybe?



2.) - Also, how can I replace the turret cap diy? The elevation cap is a bit softer on touch doe to the age, still working well but if I could make the clicks crispier...

 

[Aimright]

You could manually check the ranging magnification by placing a large target at 100 yards and draw two visible dots 36” apart. Looking through the scope adjust your magnification until you get 10 mils between the two dots and that would be your ranging magnification. Or you could do the same at 50 yards with 2 dots at 18 inches apart, or 25 yards at 9 inches apart. 

 

[bigHUN]

Wooow THANKS

I have 62 rounds on my back still a lot to learn every day.

Interestingly why 36" (0.91 meter) instead of a 1 Meter? Japanese use metric, no? I know they drive on the right side....