Well, then thats the problem....I dont have one in that groove at all. Nor is there a spare in the kit....like you have lots of o-rings. I put an o-ring on the stem and see how it goes. Thanks again.
Upvote 0
Niksan Niksan Ozark W
- Thread starter joeyw007
- Start date
Oh, you shot it out the barrel when it broke. That O-ring slides back and forth under the transfer port I do believe. Just need one that fits snug. My spares bag had one. However, I'm on my third one. I got it from an O-ring kit from Amazon. Seems to be working just fine. If I could remember which one I used I'd tell you the size right now. Otherwise, I'd have to tear mine down.
Upvote 0
I just pulled my parts bag, and I tossed the broken one in there to save for reference. It's a 1x5mm. A 1x4mm will work as well.
Upvote 0
All fixed. I had a few old crosman 2240 bolts with the same sized o-ring for the breech seal. Easy as that. Thanks for the help.
Upvote 0