Ninja bottle 4500psi 68ci What do I need to be able to fill PCP airgun from it?

Jump to latest Follow Reply
ex

ex

Member
Aug 25, 2019
3
0
Hrvatska
So, some time ago I was in airsoft and wanted to change to HPA polarstar so I bought bottle with regulators but in the end I just stoped playing airsoft. 
I bought Artemis M16 and Yong Heng compressor BUT I didnt know that I cant use this ninja bottle setup to fill my pcp... :(

1566730002_16730831275d6267122775c0.43869803_68721933_2639250559438864_6193994662248710144_n.jpg
1566730002_21045238955d62671245d6b3.62748627_69264048_2376936552396507_7917086643201245184_n.jpg
1566730002_18136369185d6267128051d2.88515797_69749880_349578675996395_6901237430708338688_n.jpg


So, can you help me?

Can I change something to be able to use this or do I have to buy something else?
Becuase I'm not from US, Ninja stuff is 2 or 3x more expensive here, so If you have something from aliexpress or ebay it would help me so much.

Thank you.
 
 

You can buy one of these to fill guns and tanks to 3K psi

https://www.amazon.com/Ninja-PCP-Fill-Station-Paintball/dp/B00JANV4K8?SubscriptionId=AKIAILSHYYTFIVPWUY6Q&tag=duckduckgo-ffab-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B00JANV4K8

Or you purchase one of these to fill to any psi that your tank will allow.

https://www.airgunproshop.com/shop/ninja-slow-fill-all-in-one-valve/

I did not shop for price and only shopped Ninja brand because it is USA made and I know I can trust these fill valves as I have both and have used them extensively with no problems. The valves on these regulator units differ from standard paintball tank valves so you will not be able to convert your reg to work like them. I expect others may make them but I am not familiar with them. This should get you in the ballpark for a fill station to fill guns and tanks.

If you want to just fill your guns anywhere from 500 to 3K psi you can get a regulator for your tank that will do that for far less money here.

http://jdsairman.com/Regs.html

He gives you the choice of where to set your reg pressures all the way to 3K. I don't know what you plan on filling from that bottle but it is tiny so you won't be getting many fills from it. Still I have a small 90ci and I get two full top offs to 3600psi for my .25 Impact from it. So about 150-160 shots and a couple more partial fills for just over 220 shots which is OK as long as I start with a full gun that gives me over 300 shots after that I love my springers. ;^)

Although I know you can get kits to up the pressure on the Ninja regs I am pretty sure they will not reach to the fill your PCP pressures you desire.

I hope this helps in your journey with the addiction.


 
Upvote 0
Those ninja bottle are for airsoft and paintball so they max output is like 800 to 1100 psi. That's way too low. It may hold 4500 psi but if its outputting only 1100 psi its useless for airgun. There are small tanks that will output up to 3000 and 4500 psi but those cost over $300. And only just like 2 to 3 refill. I'd rather spend a little more around $500 and get a 75cf tank that will refill many many times.
 
Upvote 0
Thank you for your help.
For that ninja slow fill vavle , it would cost me around $100 more with shipping and tax, so its just not something that would make sense, becuase for that money I cant get big bottle with everythig from aliexpspress.

That tank is something I have laying around, so its free. But it has to have possibility of changing the output. 

Can I put this on the bottle? Anybody knows?

https://www.aliexpress.com/item/1904624833.html?spm=a2g0o.detail.1000014.13.368c3a50x7RvAJ&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.136873.0&scm_id=1007.13338.136873.0&scm-url=1007.13338.136873.0&pvid=d9a87080-5b78-4677-b851-250e4fba0619


 
Upvote 0
Thank you for your help.
For that ninja slow fill vavle , it would cost me around $100 more with shipping and tax, so its just not something that would make sense, becuase for that money I cant get big bottle with everythig from aliexpspress.

That tank is something I have laying around, so its free. But it has to have possibility of changing the output. 

Can I put this on the bottle? Anybody knows?

https://www.aliexpress.com/item/1904624833.html?spm=a2g0o.detail.1000014.13.368c3a50x7RvAJ&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.136873.0&scm_id=1007.13338.136873.0&scm-url=1007.13338.136873.0&pvid=d9a87080-5b78-4677-b851-250e4fba0619

Click to expand...

No
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu