I am having an issue, I use the new Nate Chrony, and it seems that after every 15-20 shots the velocity starts to drop and eventually I get a notification that the sensors need to be cleaned. Sure enough, clean chrono sensors with s cotton swab and run a couple of patches through the barrel liner, and it's already dirty. Once cleaned it goes back to accurate readings.
Any idea why this would be happening? Using JSB or Diablo 18.3 grain pellets. Are these "dirty"? Can I use a brass brush in this liner to clean also? Haven't done anything except patched with Balsrol cleaner and dry patches so far.
This does not happen with my Zelos .25, so I am at a loss for why this is happening with a brand new liner on my Notos?
All suggestions appreciated as usual!
Any idea why this would be happening? Using JSB or Diablo 18.3 grain pellets. Are these "dirty"? Can I use a brass brush in this liner to clean also? Haven't done anything except patched with Balsrol cleaner and dry patches so far.
This does not happen with my Zelos .25, so I am at a loss for why this is happening with a brand new liner on my Notos?
All suggestions appreciated as usual!