Umarex Notos cocking lever.

[saneroner]

I appreciate that, I'll email about the new file! I did run into a sear engagement issue, my fix was to move the sear pin hole slightly higher which allowed it to engage properly and got me a bit more stage-1 pull. I also modified the front end so I could fit my preferred clamp-on handgrip and angled to print things as seen here:

It still needs supports, but I felt better about printing at an angle for strength.
Other changes include moving the grip position forward to accommodate my smaller hand and changing the back end to fold:

Anyway, sorry about the derail! Making things sure is fun.

Also, I had to move the inner trigger guard on the right side out a bit more (~.5 mm) as it wasn't stopping the safety pin, and therefore, not working properly.

 

[me_ne_frego]

Yupper, FX Maverick lever, modded to fit the Notos. Looks OEM.

What did you have to modify on the Maverick lever for it to fit? I want to make sure I'm capable of modifying without machinery before I buy one and try it out.

 

[Firewalker]

Milled the ends parallel, end cutter to place the pivot holes, milled off 2mm for backstrap clearance, break 4° main lever arm to provide stand off.

 

[me_ne_frego]

Well that's seems a bit much, if I can't do it with a Dremel or a drill then I can't do it. I should have been a machinist instead of a carpenter lol. I prefer an OEM look as well but I suppose the overbuilt ones will work for now. I ordered the maple one before I saw the one on eBay. Might still order it.

 

[Firewalker]

Well that's seems a bit much, if I can't do it with a Dremel or a drill then I can't do it. I should have been a machinist instead of a carpenter lol. I prefer an OEM look as well but I suppose the overbuilt ones will work for now. I ordered the maple one before I saw the one on eBay. Might still order it.

There is another one on ebay. Aluminum too!

 

[me_ne_frego]

There is another one on ebay. Aluminum too!

I'm actually ordering it now. 3D printed parts although cool leaves a lot to be desired imo. I'm going to try to anodize it black at least. I like the Maple handle better so I'll probably use that and give my buddy the other parts. A bit off topic but what do you recommend for port sizing? I'm at 4mm now but I think I should go a bit bigger.

 

[me_ne_frego]

Hello everyone, these are the levers I’m making in my shop/garage. If you are interested in one let me know. eBay has stupid rules so if you want to avoid all that let me know, also their middleman fees are stupid, but I guess everyone’s gotta eat.

Also check out my lower for the notos.

I’m open to suggestions.

Did you remove your eBay listing?

 

[Firewalker]

I'm actually ordering it now. 3D printed parts although cool leaves a lot to be desired imo. I'm going to try to anodize it black at least. I like the Maple handle better so I'll probably use that and give my buddy the other parts. A bit off topic but what do you recommend for port sizing? I'm at 4mm now but I think I should go a bit bigger.

4.5mm all the way through.

 

[saneroner]

Did you remove your eBay listing?

It was flagged by eBay. I’m appealing but this is the third time they take down a posting so they are limiting my account for a few days and my listings are shadowed for those days.

 

[me_ne_frego]

Oh wow that's crazy. I assume they think these are firearm parts? If you have another way to purchase shoot me a pm please.

 

[saneroner]

Oh wow that's crazy. I assume they think these are firearm parts? If you have another way to purchase shoot me a pm please.

Dm me.

 

[me_ne_frego]

Dm me.

I still have to wait 5 more days to message anyone since I'm a new user. I had the same problem with cfs916 when I was buying parts off of him. But you can dm me. I apologize for the inconvenience.

 

[saneroner]

I still have to wait 5 more days to message anyone since I'm a new user. I had the same problem with cfs916 when I was buying parts off of him. But you can dm me. I apologize for the inconvenience.

hah, same here. my email is my user name at gmail. email me.

 

[elwoodblues]

Just to let everyone know I got my Notos Lever from Saneroner and installed it on my Notos and it works great. The guy was a pleasure to deal with.
He shipped well packed and his price was fair, don't hesitate if you would like to get one from him.

 

[saneroner]

Just to let everyone know I got my Notos Lever from Saneroner and installed it on my Notos and it works great. The guy was a pleasure to deal with.
He shipped well packed and his price was fair, don't hesitate if you would like to get one from him.

Thank you for the kind words and recommendation. Greatly appreciate it.

 

[Conotocaurius]

Newbie comment/question, What does one gain by going with a aftermarket cocking lever? In other words, why replace the oem?

 

[OneAcreFarmer]

Newbie comment/question, What does one gain by going with a aftermarket cocking lever? In other words, why replace the oem?

Nice rims on a car make it go faster.

In all seriousness though, it just offers better purchase especially if you are wearing gloves and/or are in a hunting situation where you don’t have time to fumble with it.

 

[Conotocaurius]

Nice rims on a car make it go faster.

In all seriousness though, it just offers better purchase especially if you are wearing gloves and/or are in a hunting situation where you don’t have time to fumble with it.

"Better Purchase?"

 

[OneAcreFarmer]

Easier to grap/hold/grip/grasp/actuate/cycle. Pick one.

 

[rdpjr6504]

How about an image of it installed to show the difference ?