Umarex Notos gauge block

[88turbocoupe]

Hello all
been looking for one of those gauge blocks that fit the pp750 / Notos
long story short i finally got access to a AutoCAD CNC Machine
took my block off and to my buddies' machine shop to make a few.

been trying to buy one since purchasing the Notos but no luck
anyways if there is any interest i will be making a few seeing i already purchased the material if there is enough interest in them i will have him make a couple dozen.
that's all folks

 

[R0B]

I'd be interested in one.

 

[Firewalker]

Gauge block?

 

[88turbocoupe]

Gauge block?

yes sir #42 or #46 the block you screw the air cylinder to

 

[Savashouse]

yes sir #42 or #46 the block you screw the air cylinder to

Id like to see a picture .

 

[Firewalker]

Part #42? The air block?

 

[Firewalker]

Also part #66 on the PP750.

 

[88turbocoupe]

Id like to see a picture .

you will as soon as there machined.

 

[88turbocoupe]

This is a gauge block for the notos with 6mm transfer hole the ones I'm having done will be 4 with room.
I'm having these made as i speak just got Back from the machine shop so here is a pic for those who wanted to see.

 

[Shaky2]

This is a gauge block for the notos with 4mm transfer hole
Im.having these made as i speak just got.back from.the machine shop so here is a pic for those who wanted to see
View attachment 496630View attachment 496631View attachment 496632

I'd be interested in one

 

[88turbocoupe]

I'd be interested in one

got a call a little while ago, had to bring the gauge block back over to the machine shop
while i was there he had to do a pass on the bock i had bought as it was not flat on the guns mating surface
anyone have one of these blocks? according to him it was machined a tad off and he thinks it would cause the air cylinder not to be in line with the barrel
he showed me on mine couldn't see with the naked eye
anyone had this issue?
having him polish the inside of the block to a mirror finish.