NV007s reticle adjustment?

[MikeyJ]

Hi folks.
Im setting up a new NV007s and I’m having trouble with the reticle adjustment (first item on the menu). The crosshair image on the Pard won’t center on my scope’s reticle center point. I can get it perfectly aligned with the vertical line, but it won’t go up to the horizontal line. The X and Y values don’t go any farther than 30. I know my scope is zeroed. Any idea how I can get this to adjust properly? Thanks!
Mike

 

[Pfddi]

Digitally zoom-in the 007S to ×3.5 (all the way out) and try and align the crosshairs vertically and horizontally. Then you can take it back out to 1x and it should be aligned. I had the same problem until I zoomed all the way out! I just added an Eaglevision scope holder and had to realign to each scope when I switch rifles. A small pain but worth being able to easily use the Pard on more than one rifle at a time to save buying more Pards! LOL!

 

[MikeyJ]

Digitally zoom-in the 007S to ×3.5 (all the way out) and try and align the crosshairs vertically and horizontally. Then you can take it back out to 1x and it should be aligned. I had the same problem until I zoomed all the way out! I just added an Eaglevision scope holder and had to realign to each scope when I switch rifles. A small pain but worth being able to easily use the Pard on more than one rifle at a time to save buying more Pards! LOL!

Ahh, that makes sense. I’ll give that a try. Thank you!

 

[Ezana4CE]

@MikeyJ is your Pard NV007s mounted to your scope with the factory mounting ring?

 

[MikeyJ]

It is.

 

[Ezana4CE]

@MikeyJ I have the older 007a and it has the reticle adjustment option, but no digital zoom feature. I use an aftermarket Eagle Vision mount and can manually move the Pard to adjust and center the reticle. When you digitally adjust your reticle, does the reticle look off-center in your videos?

 

[MikeyJ]

I actually haven’t taken any videos yet, but I’ll take a few to see how it looks. Thanks!
Mike

 

[Ezana4CE]

@MickeyJ Ok. Thank you. I’m curious to see how how it looks when you do.

 

[MikeyJ]

OK, I've attached a video clip and a photo. I'm not sure if this shows you what you're looking for, though (forgive the shakiness). My scope was set on the lowest zoom setting (3x) while I went through the digital zooming with the Pard.

Also, I did try what Pfddi suggested above. I thought I had the reticle adjusted dead center a couple of days ago, but when I tried his suggestion I noticed the crosshair was once again below the horizontal line. I couldn't get it centered again. I also have to work on getting the scope's reticle level...

 

[MikeyJ]

Sorry guys, on my end the video is “processing,” but apparently it never loaded….

 

[Ezana4CE]

@MikeyJ Ok thanks for trying. The photo quality looks good though. Which scope did you use with it?

 

[MikeyJ]

I’ll try it again soon with a shorter video and see if that works. I have an inexpensive Hawke Vantage 3-9x x 40 AO. It’s a pretty darned nice scope for the $!