O-rings for GX compressor

Jump to latest Follow Reply
MikeyJ

MikeyJ

Member
Oct 29, 2022
100
50
Millbrook, NY, USA
Hi folks,
Is there an o-ring kit you would recommend that would be good for GX compressors, specifically the CS3? I have to replace the little o-ring inside the bleed valve assembly on the CS3. I can’t measure it due to its condition (does anyone know what size it is?). Anyway, I thought it would be a good idea to keep an o-ring kit on hand for this and any other o-rings that might need to be replaced.
Thanks!
 
MikeyJ said:
Hi folks,
Is there an o-ring kit you would recommend that would be good for GX compressors, specifically the CS3? I have to replace the little o-ring inside the bleed valve assembly on the CS3. I can’t measure it due to its condition (does anyone know what size it is?). Anyway, I thought it would be a good idea to keep an o-ring kit on hand for this and any other o-rings that might need to be replaced.
Thanks!
Click to expand...
Gx accessories page.
They have the full kit

gxpumpofficial.com

GX Pump PCP Air Compressor | GX CS4 Air Gun Compressors 2023

GX CS4 Portable PCP Air Compressor, 350W Powerful Motor,Max 5800Psi/40Mpa, Water and Fans Cooling, 5 Hours Continous Work, 12V Auto Stop，for PCP Air Rifle Paintball
gxpumpofficial.com gxpumpofficial.com
 
  • Like
Reactions: MikeyJ
Upvote 0
1900colt said:
Gx accessories page.
They have the full kit

gxpumpofficial.com

GX Pump PCP Air Compressor | GX CS4 Air Gun Compressors 2023

GX CS4 Portable PCP Air Compressor, 350W Powerful Motor,Max 5800Psi/40Mpa, Water and Fans Cooling, 5 Hours Continous Work, 12V Auto Stop，for PCP Air Rifle Paintball
gxpumpofficial.com gxpumpofficial.com
Click to expand...
In one of your YouTube videos you mentioned you would be having some sort of tool or tool kit for working on the compressors available at some point. Are those available yet ?
 
Upvote 0
Trucker3573 said:
In one of your YouTube videos you mentioned you would be having some sort of tool or tool kit for working on the compressors available at some point. Are those available yet ?
Click to expand...
I have a few put together that I'll be taking to the Indiana show. They are for replacing the low pressure seal. They will not be complete O-ring kits like GX sells.

But you will get red and clear grease, that tool for removing the wrist pin and piston, along with wrenchs and other tools. There will also be the low pressure seal, couple burst disks and air filter.. sell for $40
 
  • Like
Reactions: Back_Roads and MikeyJ
Upvote 0
1900colt said:
I have a few put together that I'll be taking to the Indiana show. They are for replacing the low pressure seal. They will not be complete O-ring kits like GX sells.

But you will get red and clear grease, that tool for removing the wrist pin and piston, along with wrenchs and other tools. There will also be the low pressure seal, couple burst disks and air filter.. sell for $40
Click to expand...
Cool! Will this be on your website at some point?
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu