Omega Supercharger & Omega 74CF carbon fiber tank

[pooterjoe]

I didn't get a reply to my question so I'm trying again. I have a Omega 75 CF carbon fiber tank that came with a Din Style Fitting with a restrictor. I did remove the restrictor knowing that I must very carefully and slowly release air into my PCP rifles. When filling the Carbon Fiber tank utilizing the Supercharger do I utilize this same fill line or do I need a different par/adapter for filling the tank?

 

[sonny]

I use the same line to fill my guns as I do to refill my c/f tank

 

[Humdinger]

All you need is a male to male foster fitting to connect the hose from your compressor to the hose on your tank since both of them terminate in a foster quick connect.

 

[Keyman62421]

If you check the box, charger should have come w/test plug and many come with double male fitting. My AV did!

 

[pooterjoe]

Thanks for your reply. Did you remove the restrictor pin from the transfer hose that came with the hose on the compressor?

 

[pooterjoe]

My omega 74CF tank came with the fill hose that has the restrictor in place. When filling the tank using my Omega Supercharger I should be utilizing the double make connector to link the supercharger fill line and the line that came with the tank. Should I remove the restrictor from the tanks fill line or leave it in place loosely or screwed in tight. A reply would be much appreciated.

 

[Humdinger]

It is advisable to remove it from the DIN300 during a fill. All it is is a 3 mm allen head set screw which only takes a minute to remove or reinstall in the connector.