Tuning One more solution to improve FX Impact trigger with pics

[mubhaur]

Being a bit trigger snob I decided to make some modifications to the Impact trigger which you can see in following pics.

After these modifications I can also adjust the spring strength behind the ball bearing.

This additional adjustment enables me to adjust the trigger to more precision towards a real target trigger.

Now the trigger weight of 2nd stage is actually adjustable. 

I have also installed a lighter trigger return spring.

All this makes this trigger much better. 

I hope the pics are quite self explanatory however I plan to make a YouTube video on this modification in coming days.



Regards, 



M. Umair Bhaur 

 

[Glem.Chally]

Planning on selling them?

 

[mubhaur]

Planning on selling them?

May be. Let's see. Let me give it some finer touch. 

I have already sent RAW HM1000X external plenums to a few airgunners. 

Did you like the concept of modification of impact trigger ?

 

[Glem.Chally]

Yeah I think its a good idea, and if you're happy with it I'm sure I would be.

 

[Pistonjohn]

I'd love to purchase a set of those to improve my trigger. Wanting to know more detail!

 

[fe7565]

Looking forward the video and your further tests. Trying to understand the actual hardware mod details. The "new" features you arrived to for the 2nd stage are indeed very useful. 

 

[corny]

So u took the idea of a adjustable valve…and adapted it to the ball detent. Interesting…should help somewhat

 

[corny]

There is such a thing as adjustable load ball detents

smallest one here would be 8mm OD thread. I’m sure that would work.

I’ve playing with the idea of using one to make a defined second stage in my ataman m2 

trigger is ok, but something like a ball detent would define where second stage starts 

 

[mubhaur]

//www.w3.org/2000/svg%22%20viewBox=%220%200%20210%20140%22%3E%3C/svg%3EThere is such a thing as adjustable load ball detents

smallest one here would be 8mm OD thread. I’m sure that would work.

I’ve playing with the idea of using one to make a defined second stage in my ataman m2 

trigger is ok, but something like a ball detent would define where second stage starts 

I never saw something like this. Looks like it's already made to be used.



In fact I just tried to improve my Impact trigger and myself thought the idea. 

It's good if we can find this thing ready made as it will cost much less as my machinist has to make all this on ordinary laith machine and one part at a time.

But I think 8mm OD thread will not work on Impact trigger. 

Bhaur

 

[corny]

Yeah…I think 8mm is overly large. And also the spring is probably to heavy. 

 

[Pauly5]

I like it. In my case, the screw stripped first time I went to adjust it, as there just wasn't much meat there. I had a good allan key, and made sure it was seated, so if these were a straight swap, I could butcher mine to get it out and replace it.

 

[mubhaur]

I feel that only cone may be to use an Allen key of a bit short hight to adjust the regulator with this type of trigger screw in place. 

Let's see 



Bhaur