ONE OUNCE $27.00 LDC? QUIETER THAN A TKO?

[Odoyle]

i popped this on my airforce at 40 fpe. KEEP IT AT 30 OR BELOW! before I upped the power, it was working great!

i will still buy these, but will keep them on lower powered setups!

Put some hair curlers or weak springs separated by wqshets and sushi wrap them in scotch brite type material. Put some oil on the material too.

 

[mcc196100]

I am only shooting my gun at half power, but I am only getting around 30fpe on full power.

 

[BeeGee11]

I just talked with Geo at airgun universe and he said that he took a little break from making the ldc's but will be beginning production again soon. The new models will have metal threads, and the one that I asked about was 1.2" X 6". For less than $40 shipped, I'm down to try one out.

 

[BeeGee11]

I forgot these will weigh in at 1.85oz. Not bad at all with the metal threaded piece!

 

[Odoyle]

Good to know!

 

[mrbulk]

Geo just sent me a sample of this new version to test:

https://www.gatewaytoairguns.org/GTA/index.php?topic=183010.0

 

[Odoyle]

OOOH looks promising! Thanks for sharing!

 

[BeeGee11]

If you are interested in one of these I suggest that you email him directly, even if the website shows out of stock. If he knows what you want he can prioritize your order.

 

[bambuino]

Anybody try The $27 LDC to compare to the TKO? Only weighs ONE OUNCE for real?

https://www.airgununiverse.net/wp/store/

No idea which one it is.

https://www.gatewaytoairguns.org/GTA/index.php?topic=178850

hey unko --

I been using one on my PP750, the 27$ mod from Geo at airgununiverse. Does just fine. Works phenom on a Crosman 1722 I have. Run out on mine was minimal, but bore is small for .22. When vibrated loose mod will droop and clip pellets. The idea of a lightweight mod on the PP750 is preferred due my lack of confidence in how well the shroud is stabilized on the PP750. A DonnyFL mod might be too much weight, just my thinking.

Mark

 

[Odoyle]

You can try running a thin shim around the barrel b4 sliding the LDC on to grubscrew on maybe put a dab of polish on the screw or better yet black nail polish paint the barrel then slide LDC on.

 

[BeeGee11]

Moderator from Geo arrived today, I'm loving the lightness of this guy. This one is next to a diy moderator that is 10" long X 1.6" in diameter.

I haven't tried it out yet but I'm really hoping that it works well. I don't mind the larger moderator when bench shooting but it's heavy to be carrying around and shooting on the fly.

 

[CP598]

I have one on my Avenger and it made a big difference in my opinion. Well worth the upgrade. 

 

[Stefanjan]

I have a Geo on the 1701 (not a loud gun by any means) but it makes it so quiet I have to double check my pressure all the time cause I'm convinced the gun is out of air and not shooting at all! I also got a TKO on my non QE Hatsan at 44. WOWZER that took the bark out of that rifle. So much more pleasant to shoot now! I did get a POI shift with the TKO but I chalk that up to the removal of the air stripper that was originally on the Hatsan. The GEO is so light weight as to not affect my hold or change POI at all. The TKO is heavier- but it's a Hatsan so obviously a few more ounces goes unnoticed on the beast of a rifle.