Tuning Original mod 10 trigger mech

[Johny]

Hiya,just done the seals on a original mod10 pistol, a lot of the trigger was already removed when i got the pistol,haxe instructions for a mod5 thinking they would be the same completely different, so has anybody got some pictures or info on the assembly of the mod 10 trigger as I am struggling, cheers John 

 

[Odoyle]

I believe the Model 6 is the same AKA Beeman 800/850 as the Model 10.

https://www.gunspares.co.uk/products/24758/MOD-800850/#parts

 

[Johny]

Just had another go at putting the mod10 together, let alone the trigger, got the front piston in then the springs and rear piston,into the spring compressor using a spacer at the rear still can't get the pinion cogs in,I don't want to part with the gun but it's getting very close,anyone in the UK near folkestone in Kent able to help would be much appreciated, cheers John 

 

[Odoyle]

Just had another go at putting the mod10 together, let alone the trigger, got the front piston in then the springs and rear piston,into the spring compressor using a spacer at the rear still can't get the pinion cogs in,I don't want to part with the gun but it's getting very close,anyone in the UK near folkestone in Kent able to help would be much appreciated, cheers John

http://anotherairgunblog.blogspot.com/2008/05/resurrecting-diana-model-6m-pistol-part.html?m=1

https://www.airgunnation.com/topic/diana-6g-saturday-rebuild/

https://www.airgunnation.com/topic/recommendations-for-rws-diana-model-6g-rebuild/

https://www.airgunsmith.com/RWS_Mod_6/RWS_6.htm

Marflow over on the AGW may be of some assistance. He is currently not allowed to post here. AGN Member Crank repaired his you may want to PM him.