Brocock/BRK Out with the old, in with the new

[Jay308]

.25 Ghost HP, Hawke Sidewinder 4-16 FFP MOA with medium rings.

The riser can be removed and the cheek piece slid directly on the rail, I used M5x5mm .80 pitch grub screws. Just got it setup, reg set to 140b now, it came from AoA with 165b reg, 33.95gr @ 950 fps. Shooting for 910-915 fps with Mk2 33.95. All I need now is time to actually shoot…

 

[Corvid_hunter]

I have the same rifle. Good choice.

 

[Ranchibi]

Congratulations! That's one beautiful Ghost...enjoy shooting it,

 

[Trucker3573]

I have the electronic ghost….great base platform for sure.

 

[L.Leon]

View attachment 550852

.25 Ghost HP, Hawke Sidewinder 4-16 FFP MOA with medium rings.

The riser can be removed and the cheek piece slid directly on the rail, I used M5x5mm .80 pitch grub screws. Just got it setup, reg set to 140b now, it came from AoA with 165b reg, 33.95gr @ 950 fps. Shooting for 910-915 fps with Mk2 33.95. All I need now is time to actually shoot…

Congratulations on a fine choice… Took a few shot with my Ghost Carbine before work this morning. Simply an awesome platform for this amateur… I have to pull her out of the safe more often. The Atomic and Pathfinder are currently hogging all the action…

 

[Jay308]

Everything about the Ghost is much better than my Maverick, but the gauges are bad, I actually used a magnifying glass to set the reg gauge and the bottle gauge reads about 10 bar low I think. I’ll have to replace them at some point. If it shoots as good as it looks/built, I’ll have a keeper.

 

[Corvid_hunter]

I replaced my gauges. The factory ones leave something to be desired.

 

[Jay308]

I replaced my gauges. The factory ones leave something to be desired.

I have never used dowty seals, did you reuse them? What gauges are you using?

 

[Corvid_hunter]

I have never used dowty seals, did you reuse them? What gauges are you using?

I ripped one and reused the other. Best to buy some in advance would be my suggestion. The reason it ripped was because I didn't have the gauge tightened enough prior to filling. I bought Wika gauges. They are larger.

 

[Jay308]

I ripped one and reused the other. Best to buy some in advance would be my suggestion. The reason it ripped was because I didn't have the gauge tightened enough prior to filling. I bought Wika gauges. They are larger.

Thanks, they look good. What single loader are you using?

 

[Corvid_hunter]

You're welcome. It's a CARM product.