over 1000 fps
- Thread starter 1shot1kill56
- Start date
are you sure.I have a artemis p12 .In 22 shooting 34 grain nielson slugs 1070 fps ,And a 177 shooting 21 grain nielson slugs 1080 fps.Can people post videos up here.
Upvote 0
sure .. its not a matter of if they can shoot a heavy projectile at a given speed ..its if it can do it accurately ..standard pellet weights carry enough energy to be effective to 75-80y at those speeds, so its a given the only reason you would need expensive slugs is to be effective beyond that .. so its a matter of will a cheap piece of crap gun shoot accurate enough to take small game shooting slugs at warp velocity at 80+ lol ...
Upvote 0
Is a 3/4 inch group good enough for dizzums.That is 177 with nielson 21 grain slugs at 100 yards.I also own a bunch of supposed high end guns,and i know how well my p12's perform .I'll let you know when i post my youtube video.I know you are going to be guite shocked.The gun has a robert lane reg set at 3800 psi ,fill pressure is 5000 psi.And you get 30 super quite 1080 full power shots. The gun is capable of 1114 fps , but groups open up slightly.
Upvote 0
Thank you i am making the videos to show facts on these airguns my guns have the chokes cut off so they are now slugs only.I have a 22 cal i am also going to shoot at 200 yards at 1114 fps, using nielson 28.5 grain slugs. They hit like a frieght train and shot an one and half inch group at 200. The 177 shoots 2 1/2 at 200 yards with 21 grain nielsons ,
Upvote 0
To get that kind of speed from a 15 inch barrel you would be wasting alot of air or your Chrono isn't reading right didn't know a reg could handle 3800 psi and 5000 psi fill how there arent any bottles rated safely for that pressure would have to see to believe and even then I'd be questioning it
Upvote 0
Robert lane makes the reg.They will build it to 200 bar,if you want higher you have to have the knowledge on how to do it yourself.Lane does not use spring belleville washers, they now use conventional spings. The are now more accurate and can achieve much higher pressure without spring damage.And you get 30 full power shots, you have to short valve duration.So the valve stay open long enough to push the slug with high pressure.Why would there be waited air.You have to set up the gun properly.
Upvote 0
There wouldn't if you got a short duration like you said using a blast of high pressure just didn't think there is enough length to accelerate it that fast in 15 inches as for a bottle I know they make 6000 psi steel bottles must be custom made gun then I'm assuming
Upvote 0
I will make the video and let you know when i post it. I will show you the reg set up. and show how to increase pressure.I will also show the valve system.And of course shoot the gun. There is alot of things being said by big companies to sell thier stuff.So i am going to educate people on these guns and thier workings. And break all the myths being spread around.And my guns are sub 1 inch at one hundred yards.Here is one fact there is no such thing as a starter gun. That is a phrase used by expensive gun manufacture 's to sell there stuff .I have 12 high end gun's and the only 2 i use are my edgun morana that shoot a half inch group at 100 yards with it's custom valve and reg'and also walther 25 cal. poly barrel nochoke so slugs shoot that group.And my 25 cal huben.But the guns i use most are my artemis p 12's.When you get done watching my video's you will have a much better understanding about these gun's.And an educated consumer makes better decisions.Did you notice alot of top airgun reviewers no long shoot 100 yards, the reason is manufacturing tech is so good in china that 349 for an avenger or 180 for a qb chief get you a gun that shoots as good in in most cases better than a 2200 dollar gun.And these big companies don't want that shown .Barrel tech in china is now the best in the world.
Upvote 0
I have a career 3 300 20 cal. With custom fit huma reg.They can be installed .I just sold a ultra 9 mm also with huma reg . But like you said there not really needed but nice to have.I used a reg from a marauder and machined 3 thousanths off and it fit perfect plenum and all.
Upvote 0
Waiting on the video,,, Back in the day not long ago 800 FPS was a big goal and few got there.
Mike
Mike
Upvote 0
I remember those days .I bought a career 300 that would shoot 1200 fps ,but at those speeds the pellets were all over the place.I aslo had a sumatra 25 cal.The only firearm slugs you could get were copper jacketed so i shoot those.A good one is extreme airguns on you tube , watsh the truth about airgun slugs.I had the sheridan in the early 70's and they shot slugs.
Upvote 0
Upvote 0