Anyone know?
Ripping mine up through pellet testing and inexperience.
Appreciate it.
-L
Ripping mine up through pellet testing and inexperience.
Appreciate it.
-L
P1/Hw45 breech o ring size?
- Thread starter Larcat
- Start date
I've got two bags...somewhere !
One bag of "O"-rings, and one bag of "X"-rings. Having trouble finding them !
The "X"-rings stay in place better, and seal well.
I'll keep looking.
Mike
One bag of "O"-rings, and one bag of "X"-rings. Having trouble finding them !
The "X"-rings stay in place better, and seal well.
I'll keep looking.
Mike
Upvote 0
Sorry, this is pi***** me off. I know I have them, just not finding them !
I'll keep on it...
Mike
I'll keep on it...
Mike
Upvote 0
9mm O/D and 5mm I/D …something of a bstard size…I have had them turn up 8.80mm x 5.1 but still fit…So there is a bit of wriggle room but presumably its all in an attempt to keep spares HW only.
Best bet for O ring seals (if you have several guns) is to purchase an O ring selection box off Amazon.
Best bet for O ring seals (if you have several guns) is to purchase an O ring selection box off Amazon.
Upvote 0
Describes my life any time I sit down to do a project. I can lose a box of driver bits faster than you can say....Been there, done that more times than I'd like to admit
Upvote 0
Mcmaster has em.
www.mcmaster.com
McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.
www.mcmaster.com Upvote 0
Ha...I lied... I found them.
McMaster Carr #9452K17 = o-ring
Mcmaster Carr #90025K129 = x-ring
And it's 100, not 10 ! Still cheap though.
I put the x-ring into all of my pistols, double the sealing surfaces, and being square, they stay in place MUCH better
Mike
McMaster Carr #9452K17 = o-ring
Mcmaster Carr #90025K129 = x-ring
And it's 100, not 10 ! Still cheap though.
I put the x-ring into all of my pistols, double the sealing surfaces, and being square, they stay in place MUCH better
Mike
Upvote 0