FX Panthera setup questions

[air-hunter_canyon]

Good evening,


I like the panthera and I plan on getting one. Do they have it where I can take a stock panthera and remove the small rear bottle put a 580cc bottle on the front with no bottle on the back. Then can I still fill the front bottle using the rear port? The rear port is something I really want.

 

[Kgphotos]

Yes, you can do that. There is a plug that can be installed once you remove the rear bottle. You then buy the front bottle adapter and install that bottle. I opted to have both bottles on my Panthera. I have a 480 on the front for a total of 780cc. The guys at Utah Airguns can get you all set up. Just tell them what you want to do.
Kenny

 

[Tack Driver]

Good evening,


I like the panthera and I plan on getting one. Do they have it where I can take a stock panthera and remove the small rear bottle put a 580cc bottle on the front with no bottle on the back. Then can I still fill the front bottle using the rear port? The rear port is something I really want.

You sure can

 

[Daystate22]

Hi

Does the Panthera have a one way stop check valve on the double bottle set up between the front and rear bottle air flow linkage.

Stopping the flow to the rear bottle when only the front bottle is attached but the one way stop check valve is pushed open when the rear bottle is attached.

Can you add and remove the rear bottle if the front bottle is pressurised on the rifle since the FX bottles have a stop check valve in them.