RAW Rapid part info on RAW trigger group

[glr59]

I'm looking for the grub screw size on the RAW trigger group marked D on the adjustment pictures in owners manual. It is most reward grub screw on the trigger unit. My gun is missing the screw.

any help would be appreciated.

Jerry L.

 

[manabeknives]

best person to call =Martin Rutterford
931 638 0241
he'll know and have the part
Mike

 

[glr59]

 

[jps2486]

Keep poking at it with your allen wrench kit until you find one that fits. Works for me.

 

[glr59]

best person to call =Martin Rutterford
931 638 0241
he'll know and have the part
Mike

Thanks, I'll give him a call Monday if I don't get the info before hand.

 

[glr59]

Keep poking at it with your allen wrench kit until you find one that fits. Works for me.

I realized when I went to set back the trigger that the grub screw was missing, but I can see the whole is treaded

 

[Motorhead]

4-40 or 6-32 most likely. Don't have a gun apart at the moment to confirm or not.
Hardware stores with screw selection in drawers will have them.
Get one of each and give it a go.

IF Trigger group is TM / BM the screw is NOT required. Where in HM it takes the trigger slop out when a safety lever is in place.