Parts for Walther

[bubblerboy64]

I bought a Walther LG 400 off eBay missing the fill probe for the removable tank. Found a part on line but it appears to me I need an intermediate part perhaps just a female to male adaptor to a standard quick connect? Can some one confirm that for me or tell me what else might be needed. The probe also may just screw into a female 1/8 BSP fitting .Thanks in advance.

John Heckman 

 

[Coldair]

This may help you out for getting the specs click on choose an option and it seems as though there may be a change which happened in 2012 FYI.

https://www.bestfittings.co.uk/shop/fill-probes-adaptors/fill-adaptors/walther-fill-adaptor-coarse-thread-pre-2012/

You can get your male quick disconnect adaptor from Pyramid air.



CA

 

[bubblerboy64]

Thanks CA. That's what I needed. I have a 1/8 to male connector so I should be good to go. Seems like a quality rifle .

 

[Coldair]

Your gonna love it, I have the LG300 and can be made really quiet too if needby with simple hardware plumbing washers press fitted inside of the bloop tube. I have mine scoped for precision plinking and shoots a good variety of different pellets accurately. If you want to mount a scope then you have to either use a front AO scope and rotate the scope so the windage is pointed up and the elevation is to the left in order to clear the cocking lever or use a side focus scope and shop for one that you can remove the windage turret. One quirk I do admit is that it doesn't get the approximately 600 shots claimed but at least it is plenty enoughf for my needs.




CA