Hello! I recently purchased an internally suppressed Benjamin Armada. I have had a couple suppressor baffle strikes after only about 3 mags. I also noticed the gap between the barrel shroud and the air cylinder is not evenly spaced all the way down. Starting at the breech if I slide a playing card between them it gets pinched near the muzzle. The Armada uses a free floating barrel with no barrel band, is this spacing between the barrel and air cylinder normal? I first noticed it when placing the gun down the barrel shroud bumped the cylinder making a "tink" sound... And then after some questionable accuracy at only 30 yards where 50 yards wasnt an issue a few rounds ago I took the muzzle end cap off and noticed a good sized chip on the back side, I then slid out the damaged baffles and tiny bits of plastic and lead flakes... Is my gun defective? Is it correctable? Only had it 1 week today. Thanks for any help!