EDgun Peazy Leaking - Repair Instructions?

Jump to latest Follow Reply
ashrust

ashrust

Member
Dec 30, 2020
36
9
California, United States
Hi Folks,

I have an Edgun Peazy that is leaking from the top. I bought the repair kit but I can't find any instructions on where to start and how to do the repair. No videos or tutorials out there at all. I contacted Edgun West, they said they would record a video a few weeks ago but I'm still waiting.

Does anyone have suggestions on where I should look for some help on this?

Thanks
 
  • Like
Reactions: JaceSpace1369
ashrust said:
Hi Folks,

I have an Edgun Peazy that is leaking from the top. I bought the repair kit but I can't find any instructions on where to start and how to do the repair. No videos or tutorials out there at all. I contacted Edgun West, they said they would record a video a few weeks ago but I'm still waiting.

Does anyone have suggestions on where I should look for some help on this?

Thanks
Click to expand...
Following the thread since I've been wanting to get one, how long have you had yours for before it started leaking?
 
Upvote 0
ashrust said:
I love it. Got it mid-2022 and have used it more than 50 times. It's always with me when hunting or doing range work.
Click to expand...
Glad to hear you'd had a good experience for that long! Although it makes me questions whether or not you're having a leak because it's been in use for 2 years or if it's because of the amount of uses. Cause I could see myself using it 50 times in a matter of 2 weeks.
 
  • Like
Reactions: RAMJET66
Upvote 0
Here are the threads I could find, some are about the EZFill, but they're functionally pretty similar.

https://www.airgunnation.com/threads/edgun-eazy-fill.1045664/

EDgun EaZy Fill Review by Baker Airguns

Hi everyone! This video is a quick review and introduction to the EDgun EaZy Fill system. This thing is a GAME CHANGER, and one of my absolute favorite new products. We have these in stock at Baker Airguns in both variations if you're interested. https://www.youtube.com/watch?v=5PIuEOm3yFM&t=23s
www.airgunnation.com www.airgunnation.com

EDGUN PEAZY

I recently purchased an Edgun Peazy with a 500cc bottle. i filled it up to 300 bar and when i tried to fill up my leshiy 2, it just leaks whenever i pull the peazy trigger. ive swapped out the fill probes and it still does not fill the gun because it just gushes air. i used the same probe to...
www.airgunnation.com www.airgunnation.com

EDgun - EDGun Eazy Fill leaking....

Hello all! I purchased an Edgun Easzyfill unit some 3 months ago. This is an expensive unit, but as many of you have already attested, an absolute pleasure to use. However, when it began leaking air (from the front discharge), I returned it to the dealer, who replaced it. The dealer then...
www.airgunnation.com www.airgunnation.com

EZ Fill

Does anyone know how to adjust the EZ Fill? Mine will not release the pressure. There is a lot of pressure on this so I want to be careful.
www.airgunnation.com www.airgunnation.com

Edgun Eazy Fill schematics ?

I got some leak from a bottom brass thread cap. I removed all parts in front of me on the table. Looking now for the schematics (BOM), I want to replace both orings ones here. I can measure the smaller oring no problem with that one, but the bigger is chewed up badly, no real ID/OD on it...
www.airgunnation.com www.airgunnation.com

Edgun EaZy fill not bleeding air?

I recently acquired an edgun eazy fill and it's not bleeding the air to the airgun when releasing the fill lever? Has anyone else encountered this or know how to fix it?
www.airgunnation.com www.airgunnation.com

EDgun EaZy Fill

We have them in stock, (yes I am back from Russia) Just a PSA, if you have a bottle with a slow flow valve you'll want to remove the slow flow stopper on the valve. Drain your tank, unscrew the valve and locate the bolt on the bottom of the valve. With the EaZy you don't need it and the quick...
www.airgunnation.com www.airgunnation.com
 
Upvote 0
Following up on this....

I could not find any videos of a repair. When I contacted Edgun West and Edgun Leshiy Shop, they both sent me the peazy schematic and encouraged me to take it apart and replace any problematic parts using the repair kit.

I took it apart but did not see any broken parts during the breakdown. I am now asking Edgun Leshiy Shop if they can repair it.

If anyone has suggestions on another place to get a peazy repair, please let me know.

I will update the thread with my progress....
 
Upvote 0
Update on this. I bought another repair kit and took out all the parts I could access - no luck still having air leak from the top once the bottle starts to fill. Alas, I have given up and ordered a new peazy. Very disappointing outcome given the issue is likely a seal somewhere. Also, pretty disappointed in Edgun West promising a video of the repair but never coming through.
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu