Pellet and Slug storage

I got tired of my pellets and airgun ammo sitting in the closet or on the floor, so I used some of my time off for Thanksgiving to put up a cabinet to store everything in. This is a plywood cabinet from Home Depot with one extra added shelf and 5mm steel dowel pins in place of the plastic shelf clips.
IMG_1169.jpeg
IMG_1170.jpeg
 
I got tired of my pellets and airgun ammo sitting in the closet or on the floor, so I used some of my time off for Thanksgiving to put up a cabinet to store everything in. This is a plywood cabinet from Home Depot with one extra added shelf and 5mm steel dowel pins in place of the plastic shelf clips.View attachment 515931View attachment 515932
I definitely feel your pain. Pellets/slugs need a proper home

View attachment 515934
errmagehrd! here i am all happy when i have 2k .25 and 2k .22

wanna donate me some?
 
  • Like
Reactions: cavedweller
I have my pellets stored in their original tins, but contained in air-tight oil drums in the back yard. I keep a few tins open in the house, but most are stored away long-term. Pretty sure I'll have at least half of those pellets still around when I die.
lol damn.. get a full auto pcp and cut down a tree
 
5mm steel dowel pins in place of the plastic shelf clips.
That thing is loaded.

I have my stuff in a couple of the Kitchen cabinets, i am very careful not overloading them. ( .22 and .177 pellets )

O BTW 13 and 16 grain slugs i keep on the 20 PCS boxes they come in from Zan,,,,, on my living room floor, in season they come and go fast.
 
  • Like
Reactions: Cloud9AG
That thing is loaded.

I have my stuff in a couple of the Kitchen cabinets, i am very careful not overloading them. ( .22 and .177 pellets )

O BTW 13 and 16 grain slugs i keep on the 20 PCS boxes they come in from Zan,,,,, on my living room floor, in season they come and go fast.
Yeah this cabinet is all plywood construction, and I glued the joints when I assembled it and added some screws through those joints. There are 12 screws through the plywood back panel holding it to the wall studs. The shelves are 3/4” plywood so they shouldn’t deflect.
 
  • Like
Reactions: woogie_man