Pointed slugs

[Shootfirst607]

Has anybody tried to use these in an bin tac s45

 

[ChuckHunter]

Those are definitely not gonna fit in the mag!

 

[Shootfirst607]

Those are definitely not gonna fit in the mag!

Didn't think about that.

 

[Shootfirst607]

Those are definitely not gonna fit in the mag!

Could you single load them one at a time? Or just stick with the cert8fied slugs?

 

[Shootfirst607]

Could you single load them one at a time? Or just stick with the cert8fied slugsDo you know what gun those would work in?

 

[Shootfirst607]

Or could u possibly cut down the backside?

 

[Shootfirst607]

Thank you in advance appreciate the feedback.

 

[Shootfirst607]

Thank you in advance appreciate the feedback.

Sorry new to big bore stuff and pcp guns in all.

 

[DeanB]

look like powder burner bullets.

 

[Buckeye68]

I shoot bullets that look just like that out of my smokeless muzzleloader but from the guy who was the original designer of the bullet. I’m shooting a 353 AreoMax HC bullet @ 3900 FPS.
I’ve tried to buy bullets from him in the past but they never are in stock and it doesn’t look like those are in shock either.

 

[RM.510bigbore]

A .458 Lee 2 cavity mold makes a 500 grain spire point with decent b.c made for 45-70 black powder long range shooting..Those slugs cast sized will probably be adequate...I buy pure soft lead for $1.00 a pound.....I cast a 650 grain .510 spire point boat tail for my .510 Texan with a B.C of .5....It fits and shoots in .510 Texans.... There are cast mold designs with decent b.c.....