Pointed slugs

[Shootfirst607]

Has anybody tried to use these in an bin tac s45

 

[ChuckHunter]

Those are definitely not gonna fit in the mag!

 

[Shootfirst607]

Those are definitely not gonna fit in the mag!

Didn't think about that.

 

[Shootfirst607]

Those are definitely not gonna fit in the mag!

Could you single load them one at a time? Or just stick with the cert8fied slugs?

 

[Shootfirst607]

Could you single load them one at a time? Or just stick with the cert8fied slugsDo you know what gun those would work in?

 

[Shootfirst607]

Or could u possibly cut down the backside?

 

[Shootfirst607]

Thank you in advance appreciate the feedback.

 

[Shootfirst607]

Thank you in advance appreciate the feedback.

Sorry new to big bore stuff and pcp guns in all.

 

[DeanB]

look like powder burner bullets.

 

[Buckeye68]

I shoot bullets that look just like that out of my smokeless muzzleloader but from the guy who was the original designer of the bullet. I’m shooting a 353 AreoMax HC bullet @ 3900 FPS.
I’ve tried to buy bullets from him in the past but they never are in stock and it doesn’t look like those are in shock either.

 

[RM.510bigbore]

A .458 Lee 2 cavity mold makes a 500 grain spire point with decent b.c made for 45-70 black powder long range shooting..Those slugs cast sized will probably be adequate...I buy pure soft lead for $1.00 a pound.....I cast a 650 grain .510 spire point boat tail for my .510 Texan with a B.C of .5....It fits and shoots in .510 Texans.... There are cast mold designs with decent b.c.....

 

[steve123]

I shoot bullets that look just like that out of my smokeless muzzleloader but from the guy who was the original designer of the bullet. I’m shooting a 353 AreoMax HC bullet @ 3900 FPS.
I’ve tried to buy bullets from him in the past but they never are in stock and it doesn’t look like those are in shock either.

3900 fps, must be a mistake right?? I'm not sure a 50 BMG would send that weight at that speed?!

 

[Buckeye68]

3900 fps, must be a mistake right?? I'm not sure a 50 BMG would send that weight at that speed?!

Nope, 3900 FPS was not a mistake. With a 100 yards zero it only takes 16 MOA to get to a 1,000 yards.

 

[steve123]

Nope, 3900 FPS was not a mistake. With a 100 yards zero it only takes 16 MOA to get to a 1,000 yards.

Wow I had no idea something like that existed!

 

[Buckeye68]

Wow I had no idea something like that existed!

It’s custom muzzler built on a Bat L action and a 1.9" barrel that‘s 33’ long. She’s weighs in at 63 pounds.

When I’m shooting at our club I make sure I walk the line and let everyone know that I’m going to shot it. Everyone normally gets up and walks off the line. She’s loud.