Post links to your DIY Scope Cam builds, please.

[X27]

I currently have a chepo scope cam mount I bought for $13.00 on eBay. I know I need a better mount but I can't justify spending $150.00 for an Egal vision or even the $50.00 for the high quality one like mine was cloned off of.

I have a UTG Scope with a 1.6 inch diameter eye piece and a Casio exlim ex-zr 200 with a 2 inch lenses ring.

I was thinking some PVC pipe but I want to see others builds to get ideas first.

Thanks

 

[Erik]

Here is a brilliant one, I have copied it and it was the cheapest thing and allows you to look through the scope not at a screen

http://talonairgun.com/forum/viewtopic.php?f=34&t=35212

 

[Bobinthewind]

Here is mine.

 

[X27]

"Bobinthewind"Here is mine.

Is that PVC pipe? Could you post more info about it please.

 

[Bobinthewind]

X27, Yes it is pvc, schedule 40 1 1/2" inside dia. slipped in to a 2'' inside dia. Camera is a casio exilim 1100. I had to take a dremel with a sanding drum to enlarge the opening so the pipe would fit on the lens. drilled and tapped 10/24. I was going to use nylon screws all the way around but I ran out of them. The steel screws do not touch the scope. The pipe is attached to the lens with three allen head set screws.
The other one is a 6 1/4" piece of 2" pvc, lens attachment is the same, I needed a larger opening for my new scope, I used 1" nylon screws for this one. Here are a few more pics.

 

[X27]

Bobinthewind this helps a lot thanks.. Also do you have any hunting/shooting video you can post using this it looks great...

 

[Bobinthewind]

X27, I have taken a couple of ground squirrels and several prairie dogs while shooting with the camera, the ones I have edited are converted to wmv files for emails. I have yet to upload anything to youtube. I could forward you a couple video's on email.