PP700SA- 3d printed sights?

[sald]

I got my PP700SA last week, installed a Huma Reg and tuned to my liking. Average 632fps, 25 shots. Reg at 115bar with JSB 18.13. Very accurate I may add.

I have been shooting pistols a long time and love iron sights. This gun (with a Donny Fl Tanto) needs a slightly higher front sight and a moderately higher rear sight. The dove tail measures 1/4" wide (Glock Sights are tight). I can't find after market sights and cannot lower the front sight because the moderator and cant add a higher rear sight for the same reason. Any ideas? Would be great if someone could 3d print sets and sell them here.

 

[kaylaindy]

Hey, I'll print them and send them to you if you can have someone design the file.This is an easy to use program (Tinkercad)

Tutotrial Tinkercad video: 

https://www.youtube.com/watch?v=MqEarBuMn1g

I found the front sight so far: https://www.thingiverse.com/thing:2097795

If someone want to try and design a part, I can print it out, if it doesn't work, no big deal, you can tweek the design and I can print it again. ...amatures welcome! Just PM me or email me at [email protected] for quickest response. -Nate

 

[sald]

Funny thing is I have an degree in engineering and did a bunch of drafting and CAD. I am now a cyber security sales engineer and I have not the slightest clue how to design this. I can say that that front sight would just need to be .125" taller. Lets see if someone else chimes in here. I will look at the program tomorrow maybe it will make sense to me. This by the way is very generous of you by the way!

 

[kaylaindy]

Front and rear sight found...printing now: 

Front/Rear PP700SA sights STL files (Thiniverse)

These may work, Also, you may be able to drag these STL files into Tinkercad and just make the sight post's taller or shorter. 

...it's only 10 cents worth of PLA to print this...happy to do it...better than printing dog and cat statues for practice! 

 

[sald]

Looked at them. They are for the pp700W not the pp700SA. I am playing with the Tinker Cad now probably can figure it out. I was thinking the same thing with the import. I will let you know. Thanks

 

[SilentSquirrel]

following with great interest

 

[kaylaindy]

Hers is a pic of what I was able to print. I printed one set of sights how they were designed and then one set where I stretched the sight posts a small (random) amount. Ready to be tested! If someone wants a set just kick me $5 shipping and I'll send you a sample of both sets.

Front/Rear PP700SA sights STL files (Thiniverse) or go here to get the file and customize it in Tinkercad...and I'll print your version. -Nate 

 

[kaylaindy]

UPDATE: Tall and regular version. Maybe the tall ones can be sanded to the desired height...although printing the desired height would be best. 

You could also design adjustable sites if you really wanted too. 

 

 

[sald]

I would be interested in the rear sight. It would need to be a bit higher than the picture by at least 1/16"

I have a See All Delta sight coming on Friday but I still like plane iron sights.

 

[mlk]

I know I'm two years late on this, but if I came across this thread others may too.



I had the same issue and have put together a replacement sights:

Rear:

https://www.printables.com/model/206993-replacement-pp700sa-rear-sight

Front:

https://www.thingiverse.com/thing:5387617

 

[MikeVV]

I would be interested in the rear sight. It would need to be a bit higher than the picture by at least 1/16"

I have a See All Delta sight coming on Friday but I still like plane iron sights.

I also have a couple (four I think) of See All sights. With my eye's, iron sights are a pain, but the See All sights work well. All of mine are of the Delta reticle design.



Mike