Valve broke while tightening. Does anyone know who has spare air tube parts?
Need the valve and End cap
Need the valve and End cap
PP700SA Air tube End cap with a gauge valve
- Thread starter gungeek85
- Start date
Just FYI. Nothing on that air tube needs to be tightened down. I also noticed that Teflon tape. Nothing on the gun need that either. Contact Wes at airgunsarcheryfun.com and see if he has any parts laying around.
Upvote 0
Thank you guys for all the recommendations!
Found Locally at:
Brian at veradium air
+1 (702) 406-0200
He is a pleasure to deal with.
Found Locally at:
Brian at veradium air
+1 (702) 406-0200
He is a pleasure to deal with.
Upvote 0
mine did the same thing. well mine snapped off inside! i found one where i bought one & the guy wants $80 us for it. says i had no warranty on my pistol. happened same day after 8 shots.. and yes it needed tighten air was blowing out. all i got was 8 shots!!
Upvote 0
Mike, you are almost right. Most fittings are BSPP, which seal with a gasket on either end of the thread. However, in some cases tapered threads are used in airguns, either BSPT or NPT. In those cases the tapered threads are sealed on the threads. In which case teflon tape or special sealing compounds are used there. Care must be taken.
Upvote 0