Hoping someone here can tell me the size and threading for a Hatsan Flash pressure gauge. My gauge is no longer reading and Hatsan wants about $35 to ship a new gauge to me. Looking for something a bit less expensive that will work.
Pressure Gauge
- Thread starter rdtricks
- Start date
Is it tapered or straight thread? Tapered would imply NPT and straight BSPP. Either should be 1/8". Best of luck.
-Matt
-Matt
Upvote 0
If you don’t get an answer before too long, remove it and measure it. Got to evacuate the pressure to replace it anyway. 1/8” NPT would be obvious because it’s tapered. Whereas BSPP and metric are both parallel threads like a basic machine screw/bolt. No reason to think a Turkish manufacturer would adopt the British standard so it’s most likely either M8 or M10.
Upvote 0
If it helps..
Go to Lowes or amazon or a good hardware store and get a thread guage . Metric/std. Or combined kit
The you pull your guage and easy see if straight or tapered as said above
The using the tool check the threads it has
(Example)
https://extrudesign.com/screw-pitch-gauge-thread-gauge-pitch-gauge/?expand_article=1
Then hunt a replacment with that knowledge
Go to Lowes or amazon or a good hardware store and get a thread guage . Metric/std. Or combined kit
The you pull your guage and easy see if straight or tapered as said above
The using the tool check the threads it has
(Example)
Grand Rapids Industrial Products Grip Thread Pitch Gauge 35428 - The Home Depot
Use as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. Saves time, in that it removes the need to measure and calculate that thread pitch of the threaded item. Easy to use.
www.homedepot.com
https://extrudesign.com/screw-pitch-gauge-thread-gauge-pitch-gauge/?expand_article=1
Then hunt a replacment with that knowledge
Upvote 0
GO...with it !! What's your complaint ? Have you checked other brands prices...MORE ?
More than a fair price. Wika or other gauges will cost more !!
Mike
Upvote 0