D
Deleted member 50932
Guest
Is there a resident RTI Prophet expert? Of so, could they please PM me, I am having a cocking issue. Thank you!
Maybe post your question here, let the collective answer. I know some, but would hardly consider myself a guru…
Upvote 0
D
Deleted member 50932
Guest
I bought a “fixer upper” it was a basket case that looks like maybe it was a “let’s see how much I know about air rifles” …anyway….
I have it all put together using the schematics on the RTI website, and it will not cock and reset the trigger, I’m not sure how to troubleshoot it or figure out the issue, I don’t know much about these rifles
I have it all put together using the schematics on the RTI website, and it will not cock and reset the trigger, I’m not sure how to troubleshoot it or figure out the issue, I don’t know much about these rifles
Upvote 0
Back the hammer spring out. Back the sear adjustment screw out. Probably too much of either of them and is compressing the hammer spring too much. Sear could be set too soft and not allowing it to catch on the hammer.
The trigger has a lot of adjustment areas that can be changed to get it where it needs to be. First need to get the sear grabbing the hammer.
The trigger has a lot of adjustment areas that can be changed to get it where it needs to be. First need to get the sear grabbing the hammer.
Upvote 0
As stated above...check the trigger... I was fiddling withe mine (P1) the other day and that very thing happened
Upvote 0
D
Deleted member 50932
Guest
Thank you all very much, I feel like I have it figured out from your suggestions, the sere was definitely out of adjustment, I’m just awaiting a pellet pusher and some test pellets now
Upvote 0
What speed are you guys shooting the .22 cal monster redesigned? I just got a P3 and am struggling with it. Shooting at 906 fps at first and it wasn’t good. Now shooting at 930 fps and it’s a bit better, but I feel like it could do a lot better.
Upvote 0