Umarex Purchased a Zelos looking for mods

[Mjhiggs16]

I have seen the other posts but a bit confused. I would love to find the cheapest most effective mod to quit it down if that’s baffles or any type of moderator and you have a product please post it here. Also mags. I would like to upgrade to a bottle but I’m not going to bother if I can’t find a 4500 regulator/adapter. If I am missing something please let me know. I have been shooting at about 2500 at 905 with 25.39gr and get about exactly a mag worth out and it’s time too fill. It’s worth it for how accurate it is. First PCP gun and Love it! 75yrd on the target smashing the red

 

[nobody1]

I believe the thread on the gun, the silver piece, is m16x1.5.

Would an M16.5x1.5 to G1/2-14 adapter like this work:

https://www.aliexpress.us/item/3256804918687643.htm

 

[Mjhiggs16]

Like this inline one, you just need a G1/2-14 to M18*1.5 female adapter.

https://www.amazon.com/Aopkeo-Compressed-Regulator-4500psi-Paintball/dp/B0CMX3R1GR/ref=sr_1_2?dib=eyJ2IjoiMSJ9.lXlmI1-E62HlT1H3vqj8hsBlYLvo4xIHQa1XxjYAThD4z-huSocml_fphXFmAdk-6a0Ex_0Qv2aEj9myGtcvGJSL14I9TCZH4gLu-qfGwWL0U9wvp4FY5w5mprZniQUKyIUWIbFRQu-gCWU2FK6bcnC-7RB5Sxz8AWXoQFcPcwQfMcEEbKtAlsXfsmoGsXRgqwu-GeoWZa7Ujs-p6FWBz4omDzcHO3KBMBX5QJbtSydHMHz1Rirk4ayL7q-IwOSJpRnxACMHfEChjI4agZNmxIK4e_jrYAcOeKuk-Npn7Ag.cHRBeOqbJbNeIYVeHBpMny-_dyJ--wHYscsLpXeO0t0&dib_tag=se&keywords=4500PSI%2BPaintball%2BAir%2BTank%2BRegulator%2B3000psi%2Boutput&qid=1732227487&sr=8-2&th=1

Thank you and the last question I have for you. When i look at the regulators they allow for adjustment up to 3000psi. With the gun max at 250bar. Would the 3000psi max reg be enough when 3625 would = 250bar.

Would an M16.5x1.5 to G1/2-14 adapter like this work:

https://www.aliexpress.us/item/3256804918687643.htm

i can’t see your link but when i searched for the part in there it looks like the same part i purchased on eBay https://www.ebay.com/itm/4045923523...ar=674585244900&widget_ver=artemis&media=COPY

 

[Firewalker]

What do mean "enough"?

 

[Mjhiggs16]

What do mean "enough"?

I figured it out the gun is shooting somewhere around 2600psi at the moment and so i noticed a lot of refs only go up to 2200psi and so i just purchased one that will go to 3000

 

[Mjhiggs16]

@Tango Sierra could you PM me or message me here. For some reason it doesn’t allow for me to message you direct. I would like to see what you have for 3d prints available for this zelos i just purchased a 0.5L carbon bottle and will be looking for a sleeve Picatinny rail options. It looks like you are the guy!

 

[grouch-o]

I figured it out the gun is shooting somewhere around 2600psi at the moment and so i noticed a lot of refs only go up to 2200psi and so i just purchased one that will go to 3000

how much space will you still have for the bottle, with the new REG and bottle adapter?

 

[Firewalker]

I figured it out the gun is shooting somewhere around 2600psi at the moment and so i noticed a lot of refs only go up to 2200psi and so i just purchased one that will go to 3000

If the pre-regulator supplies more than your 2600 but less than the 3625 max your golden.

 

[Dr. Kralenstein]

Ok, so who's going to be the first to do a twin tank setup? Dual 500cc on a 357 with the modded valve... oooohhhh yeeeaaahhh

 

[nobody1]

If the Zelos air tank to receiver thread is M16x1.5 (as stated before) than would an M16x1.5 to an HPA regulator thread (G1/2-14 adapter) work?

WIth that adapter you could attach any air bottle which has an HPA regulator.

 

[Mjhiggs16]

If the Zelos air tank to receiver thread is M16x1.5 (as stated before) than would an M16x1.5 to an HPA regulator thread (G1/2-14 adapter) work?

WIth that adapter you could attach any air bottle which has an HPA regulator.

For a lack of confusion this is what I purchased will see if everything comes as it should
Black Friday deals right now on tanks and reg on aliexpress price is only more expensive because i paid the 17$ shipping so that it would be here early December

 

[nobody1]

For a lack of confusion this is what I purchased will see if everything comes as it should
Black Friday deals right now on tanks and reg on aliexpress price is only more expensive because i paid the 17$ shipping so that it would be here early December

View attachment 514808

View attachment 514809

Your air bottle has an M18x1.5 thread and your regulator has a M18x1.5 input thread and G1/2-14 output thread.
The bottle and regulator can just be attached to each other.

The adapter is M18x1.5 to G1/2-14.
How can you use that adapter ?

 

[silverstreak]

What's the gun rated for?

Understood the rifle is 250B rated and having 300B in the bottle with a pre-reg set lower to 250 should be safe. I foolishly forgot it has a burst disc that should do its job if the 300B was to bypass the pre-reg. Sounds like a great set up for shot counts.

 

[Dr. Kralenstein]

For a lack of confusion this is what I purchased will see if everything comes as it should
Black Friday deals right now on tanks and reg on aliexpress price is only more expensive because i paid the 17$ shipping so that it would be here early December

View attachment 514808

View attachment 514809

You need an M16x1.5 FEMALE to G1/2-14 FEMALE. That adapter isn't going to work for what you're trying to do.

 

[grouch-o]

here's a potential mod, that - if it works for me (i am working on it) - might be something for you as well:

Snowpeak - Modding a M60B (.35cal) and found something odd.

After some hesitation, i started to increase the size of the transfer ports of my M60B in .35cal. This is my 1st airgun and therefore my knowledge is based on the uuuTube and reading up on what people discuss in here (mostly). So first of all, thanks for sharing experiences and knowledge, i...

www.airgunnation.com

 

[nobody1]

You need an M16x1.5 FEMALE to G1/2-14 FEMALE. That adapter isn't going to work for what you're trying to do.

Where can you find a "M16x1.5 FEMALE to G1/2-14 FEMALE" adapter capable of withstanding 250 bar?