Kral Arms Quick, cheap power upgrades

Seems lately I'm getting several Kral questions again. Here's a quick cheap trick to add some power. The trick is cheap but you need expensive tools or to make a friend with someone that has them... lol

Tap the valve 1/4x20 at the valve stem exit. Epoxy in a 1/4x20x3/8ths brass screw. Turn the head down flush with the rear of the valve and drill a new hole to match a QB78/Gauntlet or equivalent smaller diameter stem. Shorten it to match the factory length and a reduced size poppet from Delrin or Peek. Adds a larger flow of air for a quick short pulse.

1000012116.jpg
1000012120.jpg
 
Seems lately I'm getting several Kral questions again. Here's a quick cheap trick to add some power. The trick is cheap but you need expensive tools or to make a friend with someone that has them... lol

Tap the valve 1/4x20 at the valve stem exit. Epoxy in a 1/4x20x3/8ths brass screw. Turn the head down flush with the rear of the valve and drill a new hole to match a QB78/Gauntlet or equivalent smaller diameter stem. Shorten it to match the factory length and a reduced size poppet from Delrin or Peek. Adds a larger flow of air for a quick short pulse.

View attachment 543268View attachment 543269
Nice cheat! Lol I take it the same could be said for reximex guns? They seem to have the same bottle valve.
 
  • Like
Reactions: thammer