What is the size of the metric set screw that locks the barrel in the receiver and the metric cap screw that locks the shroud in place? Thanks, Don
Umarex Quick Notos question
- Thread starter doninva
- Start date
2 for the barrel locking to the receiver.
shroud or the rail?
2.5 for the screw that’s above the grub screw that locks the barrel
shroud or the rail?
2.5 for the screw that’s above the grub screw that locks the barrel
Upvote 0
Beware, the sizes mentioned above are the sizes of the hexscrewdrivers to (un)screw them! The ACTUAL sizes of the screws themselves are larger!
Metric screw sizes are named by their diameter, (e.g. M2, M3, M4) NOT by the size of the hexdriver to be used!
Upvote 0
OK, could l get the thread size and length of the two screws as m# x m#? I want to purchase a couple of each, at the local fastener store so they will be of a good grade. Wasn't going to disassemble my gun till tank and Z block got here.Thanks, Don
Upvote 0