AZUARO, I understood your message very well, thank you very much your explanations are very precise.
DIANK
DIANK
Upvote 0
RAPID AIR WEAPONS AND HUMA
- Thread starter Hynzie
- Start date
I noticed that the huma reg made for the RAW's has a larger volume, meaning same velocities with lower pressure. Does this mean higher shot count then?
Upvote 0
The huma is quite a bit smaller than the raws probably a inch or so shorter if you empty the gun and remove the bottom blanking plug the raw protrudes almost all the way over top of the hole the huma is all contained into the housing and leaves that hole open when I added external plenum and huma so external plenum has straight flow to the valve
Upvote 0
Yes I use external plenum on my RAW HM1000X guns and I sent Airgunmann the plenum across two ponds
.https://www.airgunnation.com/topic/raw-hm1000x-25-further-upgradations-with-new-technology-of-fx/?referrer=1
https://youtu.be/zGjDG_9qGO4
https://youtu.be/12pg13RM4U4
Bhaur
Upvote 0
Is there a way to install it. In-line with the bottle instead of perpendicular? I have the newer model with the metal m-lok rail all along the whole foregrip.
Upvote 0
No there isn't I have the chassis on my pre air force and fitted it threw the bottom of it like mubhaur my chassis if off getting painted or dura coated right now though
Upvote 0