Following video shows the regulator pressure as it comes from the factory.
Last edited:
RAW Rapid RAW HM1000X .22 Regulator Pressure Factory Setting Video
- Thread starter mubhaur
- Start date
I was having issues with my RAW HM1000X. 22. My reg.was at 149BAR after my regulator was taken apart to replace the O rings and couldn't turn the hammer spring in enough to get 940fps. Called a builder/tuner and was told to turn my reg. up to 160 BAR, 149BAR was to low. It's shooting great once again.
Upvote 0
Older RAW guns often need 160 bars to shoot .22 redesigned 25 grain pellets between 940 and 950.
Upvote 0