RAW Parts list

[Crusher]

I searched the forums and the web and didn't find much help. I'm looking for an exploded parts view for the RAW HM1000x and a parts list, including the o-ring sizes. The o-ring KIT for this gun is $32 for about 10 o-rings. I can buy 50 orings for about a dollar.

I did see Dirte had a really nice group of pictures. But no oring sizes.

Anyone have anything they would be willing to share?



Crusher

 

[Lewis]

Bookmarked. Also interested.

 

[Strever]

Here is some info i copied for the TM 1000 regulator and valve + some others

changed most of the orings out and all is looking good. Reg is still shooting where it should and nothing appears to be leaking with leak detector fluid. 

Have it aired up sitting for a week or so to make sure. Still have one to figure out and one to locate. 

The BS607 looks like it would have to come from over sea's, but don't know if the valve steam oring is ever a issue.

The one listed as "Regulator core to body" is the oring in the reg by the knurled area. I will post pics later. 

T = Theoben Drawing

M = measured O'ring

 

[bucketboy]

Not a RAW but a rapid, most of the parts are the same

if you have problems getting these sizes in the US, let me know 



Bb

 

[jaird]

Same problem here. Manual that came with rifle had practically no information. ????????.

 

[bucketboy]

There are better quality aftermarket parts available for the Rapid, most of which will fit directly into a RAW. Rapid7owners club or airgun forum uk are useful forums for parts and advice on Theoben rapid and RAW guns.



Bb

 

[jaird]

Thanks

 

[RavenRider]

That is just what I needed thank you bucketboy.